Flasher for Nokia 3610 ?

[Yos]

Help me ! How To Flash Nokia 3610 ?

[Alinus]

using knok, rolis or any other dct 3 flasher
u must select 3330 option for it

[stallone1]

i used rolis and knok to flash my 3610 and its dead now .

and now i copy a full flasher from another phone to flash my dead phone and its still dead and idea why?

[madmania]

yup, i have the same problem, my 3610 become dead after flashing with rolis. using setting 3330.

does anybody know how to flashing this phone. ???
and how ????

[Gokhan_Nokiaz]

I used Nokia Flash Tool

[stallone1]

where can i download nokia flash tool?

[madmania]

go to download section / nokia
you will find the software. but i haven't test the software. could u test it?? because I have no more 3610 :)

[Gokhan_Nokiaz]

mate i can confirm that it works ! but for Nokia 5210 you need to use KnOk ;)

[parot]

use rolis or knok selsct 5510 as your obile type...

tested...

[liteFun]

so 3610 & 3510 can be flashed with rolis as 5510?
or only 3610?

still not going to touch brothers 3510..

[parot]

3610 only 3510 s dct4...

[Alinus]

3610 is dct 3 and workis with flashers for dct 3

3510 is dct 4

[stallone1]

let me explain how i killed my 3610

my 3610 PPM is A and i download a MCU+PPM is C version

and i try to flash it with rolis and its doesnt power ON so i backup a 3610 full flash with MCU+PPM+EEprom from a alive phone and flash it to my dead 3610 and its still cannot power ON

and i have try on my alive 3610 with a Full flash with MCU+PPM+eeprom to flash on another alive 3610 and its ok so i try again to flash my 3610 alive phone with MCU+PPM C version and its dead again


Means 3610 cannot flash just with MCU+PPM

have to flash full file and its will be fine

[stallone1]

I have try to use Knok with 5510 ,5210,3330 and its show this


FLS1_GetFlashParameters : parameters found NPM-5(5510) - DCT3BT2.TIA
FLS1_PreparePhone : found flashing params NPM-5(0) - 65, 08
FLS1_ConfigurateBootstrapDCT3 : checksum is 4A8B
FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
FLE5_DirectInitialiseBootstrapDCT3 : executing bootstrap
FLE5_DirectInitialiseBootstrapDCT3 : preparing reading phone RAM
FLE5_DirectInitialiseBootstrapDCT3 : executing reading phone RAM
FLS1_GeneralReceiveConfigurationResponseDCT3 : checksum error
Cannot prepare phone

[parot]

use rolis select 5510 as ur mobile type..

[theremoids]

thanks parot... i'll try your tip.

[bestncheap]

so we choose as 5510 or 3330??, use knok or what?