PDA

View Full Version : a36 half dead pse help


superman
03-12-2002, 01:44 AM
my a36 is half dead turns on for half a second and off after using wrong software, pse help to get it working again. And what if I get another a36 how to unlock it?
pse help, tnx
fatihorhan
03-12-2002, 02:01 AM
Read the LOG and send the Log file..... If it doesnt work after rewriting you map than you have to do that.....


Download the A35 FullFlash from NEW SOFTS topic.... Flash it with Unisiemens....Read the LOG...And send it here...Someone will calculate it for you.....
superman
03-12-2002, 02:11 AM
thank you I will try
fatihorhan
03-12-2002, 02:14 AM
dont flash it yet

send for the first time your log here
superman
03-12-2002, 04:06 AM
Dear friend I cannot find unisiemens pse help, tnx
wings
03-12-2002, 04:13 AM
OK WAIT
wings
03-12-2002, 04:26 AM
READ A LOG FROM YOUR PHONE
superman
03-12-2002, 05:04 AM
thank you
wings
03-12-2002, 05:10 AM
Originally posted by superman
thank you



UPLOAD THE LOG HERE
wings
03-12-2002, 05:20 AM
WHERE ARE YOU MAN ?
superman
03-12-2002, 12:37 PM
one minute please
I need to fix my cable 1st, something wrong there.
superman
10-12-2002, 02:44 PM
here is my log please help TNX
fatihorhan
10-12-2002, 02:48 PM
here your map
superman
10-12-2002, 11:55 PM
thank you for the map but it is still not working after writing map to cell the it still does the same thing: after pressing power button one short led flash and off.
please help.
I used siemens A3x & A40 IMEI Writer attached the picture 18 KB
TNX
superman
10-12-2002, 11:59 PM
ok after previous post I tried another IMEI writer: Siemens Map Writer, Version 3.00 see attached pic and sme thing onluy one short flash and off the cell.
fatihorhan
11-12-2002, 01:40 AM
use the logger 4.03
superman
14-12-2002, 03:40 PM
I used siemens a3x & a40 unlock by gsm brothers to stop the on off problem but it said wrong software: used the logger 4.03 leave old IMEI alone (xxxxx) erase the version line in the log file then used mapper: siemens a3x all doer version 3.00 with not pressing add data and use logger v4.03 again to put map back into cell and ok, just one problem the A36 is 1800 mhz and I need 1900 mhz.
thank you for helping me