PDA

View Full Version : 6310i UNLOCKING- NEED HELP!



HANDYCRACKER2k2
07-12-2002, 09:13 PM
hi guys, today i tried to unlock 6310i 4.07, but it dont work using M-BUS CABLE!i don´t get any connect over mbus,also not trough logomanager-but F-bus works great!

so i used DIGICOM DCT4 unlocker(uses f-bus),it tells me that the phone was unlocked, but if i try an other simcard,i get PHONE LOCKED message!and i have to enter unlock code??

whats wrong, cant i unlock 6310i, and why doesnt mbus work???

please help me!!

cprafferty
07-12-2002, 11:17 PM
Its an auto-switching cable they never work I only use PURE MBUS cable it was the only way of getting the 6310's unlocked also it was the same with the 6210's

Alinus
08-12-2002, 11:55 AM
if u have autoswitching cable try techtron's software.
it has bugs for 6310, but some people report that it works

HANDYCRACKER2k2
08-12-2002, 08:06 PM
thanks to all!

i will build someone and test it,but it wasn´t my phone, so i cannot test it now!

greetz handycracker2k2

@ cprafferty -> on my dad´s 6210 my cable works fine!!!but on 6310i not!! :-(

cprafferty
08-12-2002, 11:07 PM
I have tried to use many auto switching cables where I work to unlock the 62XX's with Rolis/Knok/Whatever and always FAIL FAIL FAIL or please check cable (Which is really bad type of error message for people who don't know about computers, sounds like this "well my cars check engine light came on so I opened up the hood and the engine is still there but the light didn't go out what do I do now???")

So I got a set for myself from LogosUnlimited and bingo work first time with out problems.

So I don't know, different suppliers who knows?? I for one aren't going to lose any sleep over it.

HANDYCRACKER2k2
10-12-2002, 08:28 PM
which of this cable schematic should i use??

i´ve this 3 versions???

thanks 4 help!

HANDYCRACKER2k2
10-12-2002, 08:30 PM
Cable #1 (with 2 transistors)

HANDYCRACKER2k2
10-12-2002, 08:32 PM
Cable #2 (DEJAN INTERFACE, only with 74HC04 IC - no MAX232)

HANDYCRACKER2k2
10-12-2002, 08:33 PM
Cable #3 (RX and TX lines combinated with an Diode!)

HAMMER
22-02-2003, 04:35 PM
Hi,

now, 02/22/2003...

can i use F/M-Bus (autoswitching) cable (originally for 5110-6110-6210) to unlock my 6310? and if it is possible, what kind of program shall i use?

Adven
23-02-2003, 08:42 PM
I use the cable you list as #2. Works perfect for me on all phones !!!

HAMMER
24-02-2003, 06:15 PM
so is not problem the autoswitching cable?

Unique
24-02-2003, 06:21 PM
I'll unlock it for free via IMEI:D

John

HAMMER
24-02-2003, 06:31 PM
good idea:)