dead c45, please help me!

[filip_lipinski]

Hello!
Thank you all for this great forum.

I have a c45 that has gone completely dead. I have tried all different kinds of software to save it but with no luck. When it first went dead it at least lit up an made a beep. Then it started to make just a buzzing sound when i hit ON, and NOW NOTHING HAPPENS AT ALL!
I have been reading almost all threads but still can't get it rigth.
I'm thinking it is something wrong with the eeprom maybe...?
What should i do
I check with c45 Tool and got this
Flash info: BA20 ID: 002088BA

I would be very thankful if someone would like to help me!!!

/FILIP

[fatihorhan]

Hi Filip

----->You need to repair C45

1. The FLX File for C45...(The link at NEW SOFTS is currently dead)

2. The Flasher for Dead Phones called ALL3/4v210cracked (http://nokiafree.org/forums/attachment.php?s=&postid=47405)

3. The Logger v4.03 (http://nokiafree.org/forums/attachment.php?s=&postid=48438) to read the Log from the Phone....

4. Donwload C45 --> BA-CE20 Chips Log Uploader (http://nokiafree.org/forums/attachment.php?s=&postid=38681)

--->Start Repairing

1. Open ALL3/4v210cracked (http://nokiafree.org/forums/attachment.php?s=&postid=47405)

2. Open the C45 FLX File and select the Phone Type
*Baud Rate must be at --> 115200

3. Click at Options "Write Flash" , "Write IMEI" and "Burst Mode (10% faster)"

4. Now press the button "INIT MOBILE" and wait...

5. After its finished your phone WILL NOT switch on or it will LIGHT for a short time. DONT BE AFRAID.... Just wait...

6. Now read with Logger v4.03 (http://nokiafree.org/forums/attachment.php?s=&postid=48438) the Log of the phone....

7. Send the LOG File to the Forum and someone will calculate it for you into Map File....

8. Download the Map File and Open the C45 --> BA-CE20 Chips Log Uploader (http://nokiafree.org/forums/attachment.php?s=&postid=38681) to upload the file into the Phone.....


Voila
Your phone will work now.....

*If you have any problems Contact Me ([email protected])

PS: My middlefinger has headache cause hitting the keyboard :D :rolleyes: ;)


Best Regards
fatihorhan

[bongie]

kindly post the c45 .flx file because the link in the forum is dead now. where can i get the said backip file for c45? thanks in advance..

[filip_lipinski]

Thankyou soo much for your quick response. Fatihorhan, you're the greatest!
But it's not alive yet. But I have created the log file now.
Hope you, or someone else is able to help me out with this.
It meens very much to me!
/FILIP

[filip_lipinski]

I have tried to post the c45 flash-files for you but it wont work.
If anybody wants them (have 3 different ones) i can send over ICQ.

And pleeease someone help me make a map-file of my log-file (posted above)!!

Thankyou!

[kiko]

This is a map file for you !

[filip_lipinski]

Thankyou Kiko!!!

Now i have the map-file. Just need to uppload it to my phone now, right?

Fatihorhan wrote this in the instructions for me:

"8. Download the Map File and Open the C45 --> BA-CE20 Chips Log Uploader to upload the file into the Phone....."

When i download the file it's called c45mapcreator..?
I thought i was supposed to use some kind of map uploader (BA-CE20 Chips Log Uploader??) and not a creator.

Please help me!!
feels like i'm getting close now
/FILIP

[kiko]

Use this logger to upload map file !
And don't forget to check c45 before open map file !

[filip_lipinski]

Thankyou again Kiko, for helping me!

First of all i'm not quite sure of what you ment with "checking c45 before opan the map file".
How do i check c45?

I used the read function (in Logger403) before i opened the map. is that what you ment?

When i tried to open the map file in Logger403 i got this error.message!:
"Error in MAP File: Haven't you been told not to modify it?"

Do you know what i should do??

/FILIP

[kiko]

1. Open Siemens Logger 4.03
2. Click Write Imei menu
3. Click on model and choose C45
4. Click on Open map
5. Click on Write Imei

[filip_lipinski]

I still get the same message

I used the map file i got from you. and the logger you sent aswell.

I appreciate your fast help Kiko!

/FILIP

[kiko]

I tryed and everything is OK.
I don't know what's your problem !
What's your phone number?
ARE YOU FROM BULGARIA?

[filip_lipinski]

Thankyou anyway
i'll try one more time to go through all the steps fatihorhan told me.

By the way, I'm from Sweden!!

/FILIP

[filip_lipinski]

I tried to open someone elses map and then i get no error message. there has to be something wrong with the map file you sent me Kiko...
Is there something you can do??

[fatihorhan]

@ filip

Use the Uploader that is attached..... Another Uploader will not work.....

[fatihorhan]

And here si your MAP.....

[kiko]

Sorry man!
I forgot your phone flash is BA20 !
Ofcourse that you can not upload map with Logger 4.03.
You must use C45-NewID map writer !

[filip_lipinski]

Thankyou very much!

Should i just change .txt to .map?
and then use upload the map file with C45-NewID.exe

/FILIP

[filip_lipinski]

I tried using your (Kiko) map file with C45-NewID.exe
It seemed to work and now my phone makes the buzzing sound again when i turn it on. So it's not completely dead anymore but still...
I want to try Fatihorhans map file too but he sent me a text file.
Do you know what to do with it?

You guys are incredible! i was just about to give up but now i think it will start working again. At least i hope so...

/FILIP

[fatihorhan]

Its not possible ..... it should work with kikos map file too.....

i have seen kikos map file ...... look that you do everything right...

here is your map file again *.map format

[filip_lipinski]

I've tried it all over again according to your instructions, fatihorhan. (i used your map file this time)
Still just a buzz when i try to turn it on.
I remember an app telling me something about bad eeprom, could that be what's wrong? (i don't even know what eeprom is)

Does it matter which flash file i use? maybe i'm using the wrong one...
I used this one: C45-09_07_01.flx

But i also have: C45-08_06_01.flx
and: C45-06_03_12.flx

I have to be close now!

/FILIP

[filip_lipinski]

i have always had my card inside the phone (during flashing etc). could that have been a problem?

[kiko]

You must do all this things WITHOUT SIM CARD in the phone !!!

[filip_lipinski]

Thankyou kiko, for not giving up on me.
I tried without the simcard but then All34v210cracked.exe never got to "all done". it just asked me to press ON again (or abort). and when i did it started all over again doing exactly the same thing ending with asking me to press ON or abort...

I used this flash file: C45-09_07_01.flx

with the simcard inside the phone it at least got to "all done".

strange...

[filip_lipinski]

I just managed to go through the whole process now, without the sim card. But it is still not working?!

What is this eeprom?
And does it matter which flash file i use (of the 3 mentioned above)?

Hope you're not tired of helping me. I feel i've come a long way now and don't want to give up...

/FILIP

[fatihorhan]

@filip

Try this

1. Download the FullBackUp for C45 at the thread NEW SOFTS....

2. Flash it with Unisiemens....

3. Flash the FLX again with All3/4v2.10.....

4. Write yor map again back to your phone....


WARNING..... DO EVERYTHING WITHOUT SIMCARD

[filip_lipinski]

I'm so sorry to bother you again but i promise you i'm trying my best.

Don't know if i have the wrong version of Unisiemens but it wont work right.

I choose Phone model: c45
and then open file - c45.bin
Then when i choose Write Flash it says: "ie_BadId - Specified comport doesn't exist."

Do i have to change under settings (flash/eeprom:from/size)?

[filip_lipinski]

Now i managed to flash the phone with Unisiemens!

Then I used All34v210cracked.exe with C45-09_07_01.flx (flash file for dead c45 i think)

But it wont work!!? it wants me to press ON so that it can start flashing but when I do, nothing happens??

Am i using the correct flash file?
what can be wrong??

/FILIP

[fatihorhan]

you have sometimes to take the battery out after flashings.... or try with the cable..... take it out and than again in.....

[fatihorhan]

And here is Unisiemens for you.....

[filip_lipinski]

Now i have flashed with unisiemens (4.0)

Then with All34v210cracked.exe using C45-09_07_01.flx

all worked so far, but then

when i'm trying to write the map file with C45-NewID.exe
it says
Connected...
Booting Up
Writting MAP File

But it never gets done. It looks done in the status field but no "all done message" of any kind...?

[nmartin]

Hi group, im new here.

I have one question, Ive downloaded All34v210cracked.exe, but cant get it to work in windows xp, it gives me a "All34v210cracked.exe has incountered a problem and needs to close error" is there a fix to this problem ?

Best Regards
Niels Martin

[cab]

@filip

1. flash the phone until you got "wrong software message"
2. read log
3. convert log using log converter by the attached file
4. open converter log and create a map file
5. write map using c45newID.exe
6. phone must work now

[cab]

@filip

1. flash the phone until you got "wrong software" message
2. read log
3. convert log using log converter by gsmnow
4. open converter log and create a map file
5. write map using c45newID.exe
6. phone must work now

http://www.iespana.es/gsmnow2002/c45mapcreator.zip
http://www.iespana.es/gsmnow2002/convertidorlogs.zip

[filip_lipinski]

thankyou cab!

But which soft should i use for flashing (all34?)
and which flash file?
C45-06_03_12.flx
C45-08_06_01.flx
C45-09_07_01.flx
??

[kiko]

@Filip

....go on the icq....

[lnesland]

I have the same problem as above. But where do I get the FLX File for C45 from??

[lnesland]

Anybody know what is wrong?? I get to number 4. , but after that nothing happens... I wait for 10 minutes and nothing happens.
I use the "C45-09_07_01.flx" file. Please help


1. Open ALL3/4v210cracked

2. Open the C45 FLX File and select the Phone Type
*Baud Rate must be at --> 115200

3. Click at Options "Write Flash" , "Write IMEI" and "Burst Mode (10% faster)"

4. Now press the button "INIT MOBILE" and wait...

5. After its finished your phone WILL NOT switch on or it will LIGHT for a short time. DONT BE AFRAID.... Just wait...

6. Now read with Logger v4.03 the Log of the phone....

7. Send the LOG File to the Forum and someone will calculate it for you into Map File....

8. Download the Map File and Open the C45 --> BA-CE20 Chips Log Uploader to upload the file into the Phone.....

[ellwar]

Hi all!
This is log file C45 (dead ), for calculate MAP.
Whether probably to receive a file?
Thanks!:)

[THE FOX]

i have a dead sl42, can i use the same software to fix
my fone???
thanx..