shad
22-12-2002, 06:23 PM
my c45 totally dead after flashing by unisiemens (BA20 flash)
so I :
1. flash it by All 3/4 2.0.91 with 09.07.01.flx
2. create .log with Logger 4.03
3. create .map with C45 by Flexasist
4. upload .map with Logger 4.03
but I receive 'Wrong software " (even after unlock)
so I :
1. flash it by All 3/4 2.0.91 with 09.07.01.flx
2. create .log with Logger 4.03
3. create .map with C45 by Flexasist
4. upload .map with Logger 4.03
but I receive 'Wrong software " (even after unlock)