PDA

View Full Version : Help my phone i DEAD



shlomiassaf
06-01-2003, 04:46 PM
Hi Guys..

i`v managed to download the flash file
and back it up in my H.D.

anyway.. there was no file at the second flash (OGM)

so i tried uploading a new one there (i tought maybe i`ll have
to types of Flashs one Cellcoms and one Oranges)

anyway it fucked up my phone so i upooaded the Main
|BIn that i downloaded before..

anyway the phone now simply turn on the led for 1 sec and
then nothig happens and you can even turn the led on again
it is simply dead!

what is the procedure for uploading AXF to the phone?
i mean i shut off the phone the simply upload then disconnect
the cable when done (when LCD blinks on Off) and
operate the phone right?

did i miss something?

please please help me my phone is dead and i need it badly.

Damian
06-01-2003, 05:33 PM
first of all which phone do you have. If it is 3310 for example the best thing to do would be to download SEPERATELY the MCU, PPM and EEPROM then flash them to the relevant addresses. MAke sure that after flashing all this you set faid then change IMEI back to number on the sticker then set faid again

The addresses for flashing these parts are available somewhere in this forum

hope this helps

Damian

shlomiassaf
06-01-2003, 05:43 PM
Thanks

But this is the Smasung Forum

and i have the Samsung SGH-N600...

Thanks anyway..

anyone else can help me?

Damian
07-01-2003, 09:18 AM
oh yeah.......

oops!

samgsm
08-01-2003, 12:51 AM
of course you missed something. you should have dumped the secondary eeprom also. i dumped an ogm file from the same phone also. i believe now you suffer from inconsistency in the files.

now to fix your problems, try uploading to the phone a consistent (samsung factory) flash using wintdn.exe there are european flashes
for example: GN60AVB1 or GN60AVA4

now as for your problem you have to answer:

when connecting t100 cable with the phone off, is the led working ?

if so:
1 use wintdn, upload the secondary flash
2 disconnect cable
3 turn briefly (on and off)
4 connect cable
5 when connecting t100 cable with the phone off, is the led working if so continue, if not, go to step 2
6 upload the primary flash
7 turn off and on
your phone should be working now.

now get from someone else the flashes you really want, with your language and carrier etc.

generally, if you have problems flashing one of the eeproms
you should repeat steps 2-6(with the relevant eeprom primary or secondery) repeatedly

8. if this doesn't work, use toolbox 4.3 try using model n600
9. if this doesn't work, use toolbox 4.3 try using model n620

if all fails - try repeating 8,9 with Environment setting fifo 14

anyhow, allways upload/download main and secondary flash seperately, turn phone on/off and physically connect/disconnect cable between flashes.

markchee
17-01-2003, 04:51 PM
Hi,Mr samgsm,I got a n620 with (system failure contact provider)can you pass on some tips?Thanks


mark
____________________________________________
Sometimes you get help,sometimes you don't,so pray hard