NFader v1.1 (SW for adding fading LEDs) [Archive] - Nokia Flash Reverse Electronic Engineering

13-01-2003, 12:44 AM

NFader v1.2

supported models: ALL DCT3 GSM (as I think :)) except 3210, 7110 (but I'm working on it)
Almost fully automatic (except CheckSum, I do it later :))

Now keypad don't blocks while fading (tested only with 3310, on other models may not work)

If SW displays 'Subroutine not found!' or 'Unsupported fade code type!' this phone model can't have fading leds ( at this time )

Sorry, NFader v1.1 has bug that causes in bad update for models with fade code type other than 0, 3. I'm very sorry.

So new release NFader v1.2
please forgive me :)

prasert

13-01-2003, 12:55 AM

Dear Al.
This good develop, very thank you.
Regards.

slikmik

13-01-2003, 01:27 AM

Wow sweet ;)

Nice software dude

Can you tell us how u went about creating no buffers on keypress? Very impressive :)

Also any chance you would share your source code... ? Im sure me and others would be very grateful

Mike

Double L

13-01-2003, 01:33 AM

@ Al

Thanks man, your great!!:) :) :)

More Power!!;) ;) ;)

nyukie

13-01-2003, 03:14 AM

The Keypad works fine? :p but how about the Rythmic Backlights..... Does it support 6150 P5.23?:D

Thanks.... Great App.

kid_rock

13-01-2003, 04:04 AM

Nice SW update.....I hope 3210 can support soon!!!

Thanks Boss AI.....

theremoids

13-01-2003, 04:50 AM

thank you mr. Al !!!

pipoy

13-01-2003, 04:59 AM

GREAT MAN!!

thanks Al

:) :)

Swiftie

13-01-2003, 06:03 AM

Now keypad don't blocks while fading (tested only with 3310, on other models may not work)

This seems 2 be workin on my 8250! But I need 2 set FADING time a little bit longer 2 test it fully!!

Anywayz thanx for yet another update to ur excelent SW!

Now we can use this to patch n e files without a doubt!! ;)

Brgs

jigger

13-01-2003, 06:16 AM

finally...i can put fadin on my heavily modified fls...
my hat's off to u Al...thanks a lot!!!

newflasher

13-01-2003, 07:02 AM

8250V06.00 OK
Thanks again.:D

gsmtech-SK

13-01-2003, 07:24 AM

5510 4.53 works excelent. Thanks for best soft..

THE-MATRIX

13-01-2003, 08:50 AM

Now keypad don't blocks while fading (tested only with 3310, on other models may not work)

WoW :eek:

westy

13-01-2003, 10:21 AM

Originally posted by slikmik
Wow sweet ;)

Nice software dude

Can you tell us how u went about creating no buffers on keypress? Very impressive :)

Also any chance you would share your source code... ? Im sure me and others would be very grateful

Mike
yep i wouldnt mind seeing the source :D hopefully then i will learn how to make some s/w myself ;)

ampdeck

13-01-2003, 10:45 AM

cool dude!:p

ryan_chong

13-01-2003, 10:47 AM

This version is better!Great!Now,it's very easy n simple to hv faiding lights in our fls files!Keep it up!
Thanks a million.....

mekme

13-01-2003, 12:09 PM

hello.

why is the 3210 version still not supported ?
is there some problems or is there no1 that have the time to test/work with it.

REYESITO

13-01-2003, 12:10 PM

thank you but the 6120 where this??;) ;) ;) ;) :( :p

thanasis

13-01-2003, 12:55 PM

thank you Al.:)

13-01-2003, 12:59 PM

You can TRY this SW with ANY phone, just play with Fade code type value (0 - 3) in 'data.nf2', maybe it works :)
But if it displays 'Subroutine not found!' this phone model can't have fading leds ( at this time :))

@slikmik & westy
sorry, no sources

kootp

13-01-2003, 01:02 PM

Excellent Job Man...

works good on 8210 v5.31.!!
BUT keypad is still bloked while fading.

When do yo release the software for other phones of fixing the error of keypad blocked thing?

we r waiting.....

diego

13-01-2003, 01:18 PM

thanks Al. you're a genius:-o

<M457>

13-01-2003, 01:47 PM

hi Al,

can you post or send me nokia 6110 5.48 rom3 flashfile?
In the link you have posted me there is only 6110 05.48 rom4! :(

B.R.

-=)(M457)(=-

74108520

13-01-2003, 02:00 PM

no support for 3610

13-01-2003, 02:20 PM

Originally posted by 74108520
no support for 3610
Try this one

[3610]
data = 1

@<M457>
I've sent it to you :)

gatsby76

13-01-2003, 02:32 PM

after setting fade effect in the flash, what is the best mcu / faid killer to use on this ..... Its not always working right on my 8210

Please advise.

Thanks a lot its real cool :D

Kontact

13-01-2003, 03:09 PM

Originally posted by gatsby76
after setting fade effect in the flash, what is the best mcu / faid killer to use on this ..... Its not always working right on my 8210

Please advise.

Thanks a lot its real cool :D

g3nolite 1.7 has the killers. 8-)

but surely AL might include the killers. in furture version

regards

melakamobile

13-01-2003, 05:04 PM

Hey AI can u please send me the 3610 one??Thanks

nEMO

13-01-2003, 05:20 PM

Thanks Al !!!!!!!!

13-01-2003, 05:59 PM

Originally posted by melakamobile
Hey AI can u please send me the 3610 one??Thanks
I don't understand your question

dazexyz

13-01-2003, 07:15 PM

3210 and 7110 is absolutely hopeles or need more time to do it?

Thanx for answer...

DaZ

ToneMan

14-01-2003, 03:29 AM

Thank you AL.

gardz

14-01-2003, 06:28 AM

can u do it in 6130 dsp4

dis is the clean flash file

melakamobile

14-01-2003, 08:04 AM

Try this one

[3610]
data = 1

@<M457>
I've sent it to you

Hey AI i also want the 3610 fading light!!!!

14-01-2003, 08:55 AM

Originally posted by melakamobile
Try this one

[3610]
data = 1

@<M457>
I've sent it to you

Hey AI i also want the 3610 fading light!!!!

Insert this strings in to 'data.nf2':

[3610]
data = 1

And try to update your flash. And next time read all posts!

@gardz
[6130]
data = 2

In next version of my SW I include autodetect of fade code type

BitMap

14-01-2003, 10:53 AM

..............and Al, anything for 8855 as yet? Thank you for your time (must be hell of a task answering all of us)!!!!

gkagg

14-01-2003, 11:43 AM

Hello to Al and all the members of NOKIAFREE. The tool is great and it works on 3410 v4.09
without affecting the rythmic backlights when receiving a call...However a little bug occurs when playing Munkiki. When our friend completes a level the lights are flashing, but due to the fade effect patch there is a little delay... Thats all just for info..
@Al keep up the great work!!

14-01-2003, 01:06 PM

Originally posted by BitMap
..............and Al, anything for 8855 as yet? Thank you for your time (must be hell of a task answering all of us)!!!!
Read 1st post in this thread and try to use your mind :)

w0rf

14-01-2003, 01:23 PM

fading still working nice as always on my 3330, but the don't block keyboard doesn't work unfortunately..just to let you know:)

bgcngm

14-01-2003, 02:10 PM

Originally posted by w0rf
fading still working nice as always on my 3330, but the don't block keyboard doesn't work unfortunately..just to let you know:)

Hi :)

I tested the "don't block keyboard" thing in a 3310 and a 3330 and worked perfectly.

nyukie

14-01-2003, 03:27 PM

Hey AL... how about 6150 P5.23? i tried to use the 6150 settings but didnt work....

Does it have to be a clean MCU?

Thanks

Unique

14-01-2003, 05:15 PM

I have a problem with my 6210. I've added the code, reflashed all that as you. But if i'm on wap and the leds faid the phone turns off and wont turn on again till i reflash it.:confused:

Anyone else had this problem or just me?

John

Dark Lemming

14-01-2003, 05:17 PM

thanx for this great soft. tested it on my 6210 and was perfect. this soft is 99% perfect (the other 1% goes on if you can insert checksums calc in this great proggie ;))

14-01-2003, 05:56 PM

@All
Sorry, NFader v1.1 has bug that causes in bad update for models with fade code type other than 0 or 3. I'm very sorry.

So new release NFader v1.2, must work on all GSM models and SW versions except 3210 & 7110 (I'm working on it), but you may try it on others :)

w0rf

14-01-2003, 10:58 PM

Originally posted by bgcngm

Hi :)

I tested the "don't block keyboard" thing in a 3310 and a 3330 and worked perfectly.

tested it on a 3330 v4.50 fade in & out time to 3
i goto menu..let the light go out, then I press the down button.
the next menu item appears after the lights going on completely.

Well, still using the fader though:):)

Swiftie

15-01-2003, 12:04 AM

Originally posted by Al
@All
Sorry, NFader v1.1 has bug that causes in bad update for models with fade code type other than 0 or 3. I'm very sorry.

So new release NFader v1.2, must work on all GSM models and SW versions except 3210 & 7110 (I'm working on it), but you may try it on others :)

Do we still need the DATA.NF2 file??

bgcngm

15-01-2003, 12:37 AM

Originally posted by w0rf

tested it on a 3330 v4.50 fade in & out time to 3
i goto menu..let the light go out, then I press the down button.
the next menu item appears after the lights going on completely.

Well, still using the fader though:):)

Well wOrf, that's correct... But with my 3310 that also happens. If you have an original flash happens the same thing. Pressing down button, the next menu only appear when the lights are on. But in that case they go on very fast.

To see if the "don't block keypad" function works, just do this: Make a call to you 3330 and press cancel or answer when the phone is fading (out or in). If the call is cancelled or answered it's working. Just test again the old Nfader version and you'll see that doing this test the call only can be cancelled or answered when the lights are completely off or on.

ldicdican

15-01-2003, 01:22 AM

dear Al,

you're really gr8!!!
still working for 3210 compatibility?
i'm also still waiting for it......

GOOD LUCK and STAY COOL!!!

15-01-2003, 07:19 AM

@Swiftie
no need this file ('data.nf2') anymore :)

@w0rf & bgcngm
If you don't want wait when leds fade in, just press any key on keypad while leds fading in :). And if you want 'quick answer', just don't use fade in :)

@Indicdican
I'm almost near to solve this :)

ldicdican

15-01-2003, 08:20 AM

@Al,

WOW! thanks for your effort on solving the 3210 fadein/fadeout... just can't w8 for the release...

Best Regards,
Lito Dicdican - [email protected]

:)

Dark Lemming

15-01-2003, 02:06 PM

@Al - are you planing to add the flash crc calc in your program?

15-01-2003, 02:35 PM

Originally posted by Dark Lemming
@Al - are you planing to add the flash crc calc in your program?
yes in next release :)

HotCosmo

15-01-2003, 05:51 PM

@Al: Thanks for your great Program!

User32

15-01-2003, 10:20 PM

Originally posted by Dark Lemming
@Al - are you planing to add the flash crc calc in your program?

there is no need to implement such function. there are already some progz for crc check: g3n0lite, ChkFixer by Joox(which i prefer) and some other i can't remember. anyway, Al, do whatever you want; we're just telling our opinions. And keep up the GOOOOD work!

16-01-2003, 12:23 AM

Originally posted by User32

there is no need to implement such function. there are already some progz for crc check: g3n0lite, ChkFixer by Joox(which i prefer) and some other i can't remember. anyway, Al, do whatever you want; we're just telling our opinions. And keep up the GOOOOD work!

I've already done this, update CS or kill them :)
New release with 7110 support and as I think also 3210 will be arrived in about next 12 hours :D