PDA

View Full Version : 3310 keypad problem!


srnouri
15-01-2003, 10:33 PM
Hi.
my friends , I have a problem with a nokia 3310 keypad and its number <<one>> (1) dosnot work .I cleaned its surface and check its connection but it dosnot work yet and no any other problem in this set. If you know , Please help me
Thank you .:confused: :confused: Hi.
wesam
16-01-2003, 04:04 AM
hi
i think that also you have some leds not working
just flash the phone with full flash
good luck
please send the result
wesam
srnouri
16-01-2003, 08:58 AM
Hi Wesam.
Thank you for your help. Its solved my problem.Thank you any way.;)
Fonefingz
19-01-2003, 08:12 PM
if the leds near yhe bottom of the screen of a 3310 stay on, does that mean its needs to be flashed or is it hardrware fault thru liquid damage?
srnouri
20-01-2003, 11:08 PM
Dear fonefingz
Thank you for your attention to my problem.
That phone had scrren light on too and after flashing with full flash that problem sloved too.
Thanks again.:roll:
liteFun
30-01-2003, 04:50 PM
hmm... i had same problem with friends 3310, it had v5.57 and he wanted 4.xx to his phone.
noticed that 1 weren't working.

so, what really is problem in 3310 if key 1 is not working?
error in flashing or something harware problems or parts changed?
wesam
31-01-2003, 01:32 PM
Hi all
if your phone is working good but only no.1 is not working and theres some leds always on then its software proplem
other its hard proplem
goodluck
Wesam
mkwatis
09-02-2003, 06:10 PM
[QUOTE]Originally posted by wesam
[B]Hi all
if your phone is working good but only no.1 is not working and theres some leds always on then its software proplem
other its hard proplem
goodluck
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,.
hi,members i treat my phone nokia3310 with the same fault by removin keypad/light control ic( nmp......33.)or N400 at the bottom of the circuit near charger connecting pads .give me results
nasty nick
18-02-2003, 02:08 AM
the same sort of thing is happening with my 3310
i cant use buttons 4, 9, *, 0
havent got flashing software either - have cables but they join to the printer port !!
please help


mod at covers forum (http://coversforum.proboards4.com/index.cgi)
wesam
18-02-2003, 02:27 AM
Originally posted by nasty nick
the same sort of thing is happening with my 3310
i cant use buttons 4, 9, *, 0
havent got flashing software either - have cables but they join to the printer port !!
please help


mod at covers
forum (http://coversforum.proboards4.com/index.cgi)
hi
COMPARE WITH OTHER BOARD
check if line cut between any key from this not working with R414 & R415
IF NO LINE CUT THEN CHANG R414 OR R 415
PLEASE SEND RESULT
GOODLUCK
Wesam