ProjecT 1.00 5110 PPM T

[BOEBOE]

Now working on Project 3310 1.00!!

------------------------------------------------------------------------------------

Please look for ProjecT 1.50
Link is in my signature

------------------------------------------------------------------------------------

ProjecT 1.20:
Phone showed contact service all checksums are calced now.
No need to calc faid.
------------------------------------------------------------------------------------
ProjectT 1.00:

-Languages: English & Dutch
-Fade In & Out
-Bitmaps changed
-Blinking SMS & Linefeed character
-Batt & Net sterngth
-Changed Font
-Added ringtones and sms-tones
-Security code
-Dead MCU/FAID Checksum
-Inverted screen

Next: ProjectT 1.5:

-Will add slideshow, net sterngth, favorites menu, huge firmware change, flashing menu txt, smaller menu fonts, start & shutdown tone,laguage change (txt)...

Pls post your needs here !

[enzo]

Hey BOEBOE!

Sounds nice! I tried to mod the 5110 soft but always got contact service. (I killed all checks and Faid).

Greetingz from Germany
[enzo]

[battouter]

tried flashing your file but got contact service... what did i do wrong? please help....

[BOEBOE]

The flash file did work for me
maybe you wanna try eeprom flashing
i'll post asap... that is if i've made my eeprom cable, or better wait for version 1.50

thx for reply

[battouter]

if it worked for you... how did u exactly do it? i used flasher by rolis 477... updated faid using noktool

[pico]

not one person tried to see WHY it is contact service?
i think ppm validity may have failed, you can turn that test off with cracked wintesla software

[BOEBOE]

I saw somewhere if u only modify bitmap 1 (phonebook)
en then flash it to ur fone en then modify all other bitmaps and flash it work fine. That's why I say better wait for version 1.50 i'll try to make no Contact Service. Oh, and FAID and MCU checksum is killed

[NokDoc]

Hi,

>> WHY it is contact service?

Recalc the Mcu Checksum.

Then the problem is solved.

NokDoc

[BOEBOE]

Hmmm, try version 1.20 mcu checksum are calculated, faid is still killed, ppm calced. Just let me know how it goes. And if you wanna copy bitmaps or anything, just go ahead...:o

[NokDoc]

Mr. BoeBoe,

>> Oh, and FAID and MCU checksum is killed.

I missed that part, sorry.

It was the only bad calc I could trace, but it indeed was Dead, so the value didn't matter.

NokDoc

[asgaardro]

does any one where to find a mcu +PMM with romanian language for 5110
and how can i write the software on this model because when i try to read from the phone or wite with rolis4.78 or knok build 1 it says tx to high. i have checked all conectioon and all are fine sow what is the probelm??
if i use the data cable al is ok
i used same flash cable to write the software on my other phones a 3314 and 3410 al it has worked. the flash cable is ok .
may be the phone is ....what?//