6210 Bad Flashed! Very Urgent! Please HELP!

[ByteMe]

Hi, i have a 6210 3.04, and tried to read it in darkflasher, but it kept giving error on reading (with flashid 00898896). i tried in rollis 5.14, but nothing to do because i got error (bad phone ram; not support version, etc..). only in nokia flash tool, i could get it to read, and then i flashed it with nokia flash tool, and a nice 'contact service' screen said hello... I thought, probably a bad partial in the software, so i gone to darkflasher and unlocked, the phone turned on, but no letters on screen and a frozen phone.
i tought it was time to use my backup, and after using it the doesn't even turn on!

can i flash it with a full flash from the net? How can i know wich languages are in a full flash? if it's different from the original and phone goes crazy can i flashed with another with the same language pack of the original, and will the phone work?

wich adresses should i use to full flash it? and wich sould i not touch, to avoid having to take it to a nokia center?

i know it's a lot of questions...

Thank you!
Best Regards!

[Abe]

you flashed it with a full backup from 200 to 600?
if that,and your backup was corrupted then you killed your phone.......
first (mybe eeprom area is not damaged) open the backup with Nfree and you will se the lang pack you have........
now flash the phone with same version of mcu 3.04 and same version of ppm pack that you readed in Nfree........
but it must be not 4 MB but about 3.8 mb (without eeprom)....find it soemwhere on the net.....

[||Joe]

Well, 00898896 = "intel 16 - Intel 28F320B3-T, size 32Mb"

Friendliest Dejan Wrapper program in my opinion is the DarkShell

(http://dlemming.no.sapo.pt/dfs214b.zip)
Extract this to c:\darkshell

And obtain the full flash for your phone at

(http://www.geocities.com/minders_site_4/6210_304Repair.zip)
Extract the 6210-304.fls file from this archive and save it in c:\darkshell\backup

Now run the program, and make these modifications

- Select "flash ID list" from the menu at the top, a new window will appear, from this select 808898896 (Intel16/32) and click "back"

- Select FAST from the CPU menu

- Select RESTORE from the OPERATION menu

Now from the main screen, select model = 6210, vers = 3.04
Change the start address to 00200000 and click FLASH

Dejan will start, hit enter,enter (etc..) confirming start address of 00200000
and flash away!

[||Joe]

try reading small part of phone memory again, and check in a hex editor to see if it all 00 FF etc... have you tried flashing full backup again? also try this in hex editor and check for the same 00 FF partern. - could be bad loader or wrong setting for parrallel port (unless you know that its been working for unlocking other phones), try changing those. try to use dejan original flasher to flash backup and do reading. if none of that works:

yes, you can use a backup from the net but you must cut out the eeprom area (and not flash over the eeprom are in your phone, basically) using a hex editor. or get the mcu + ppm's from brad.satelit.cz but you must cut the first 16bytes from the ppm's (where it starts PPM in the file is where it should start). I think even if you use the same mcu + ppm that it will still require a log - don't quote me on this but in every other scenario of mcu/ppm you wil DEFINATELY need to create a log, goto www.b-phreaks.co.uk (http://www.b-phreaks.co.uk) as they provide this service. attatched is doc you may want for reference.
Hope this helps
Outerc0re

[ByteMe]

Hi There! And thanks for your attention!

the backup i made was from 200000 to 400000, so the eeprom area wasn't touch, and the log won't be necessary (i think) and after restore the backup i made, i tried to read the phone with rolis and the message window that usually has the phone version was filled with 00 and FF, so the backup i made was a bad backup.

the language pack i need, must contain english, spanish,portuguese... languages, so i think i need the language pack F.

Thank you all for the help you provided. I think this will do.

Regards!

[Leandros]

hi ByteMe!

get nfree (at this site here; http://gsmsearch.com/nfree/Nfree12P.zip), read in your backup and recalculate all checksums!
write it back to your mobile and it should be fine.

regards,

Leandros

[ByteMe]

Hi Leandros
My backup is bad.

And i can't find a one with the portuguese language in the net. I think nfree won't help me in this.

Bye and Thank You.

[||Joe]

ByteMe!

try doing the 2nd half of my last post, this is all that can be done. as I said, with a backup of 00 FF you ain't gonna do much to the phone! try brad.satelit.cz for ppm and mcu packs. flash it onto phone ( use info from pdf file I attatched before) and create log and pay a few $.

hope you get it sorted

regards

outerc0re

[Abe]

look man..........
i 'm telling you this.........
don't make a very big problem of this..............
i'm telling you this because you flashed it only with 200-400 and you fucked only mcu.....
thats a piece of cake...........
you didnt fucked PPM and either eeprom....
because mcu is from 200 to 520....so u fucked only a PART of mcu.......
dont bother to do that or that or Nfree or flash this and that.......
just find a backup of 3.04 and mail me.........
you can flash the phone with 3.04 from 200-400,200-500 and 200-520......
if someone have the full backup from 200-600 of 3.04 i will make you an mcu flash so you will restore your phone without problems..........
thats all......
please dont do anything anymore because you can kill your phone forever......

[||Joe]

cheers Abe mate. Didn't know that flashing same mcu version or flashing same ppm version "over the top" could be done without logs.
thx again

outerc0re

[ByteMe]

Thanks Abe!

You're the boss and our savier!
I already found a backup and cut the mcu part. Thank you! Thank You! My 6210 is rocking!