PDA

View Full Version : Big problem with 3310, who know please help me



galaxes
03-02-2003, 04:30 PM
In my 3310 begin disappear picture from the screen(stay only clear screen), i flashed it another flash but it is not help, picture disapear for example then i set the time , if i set start up logo and it is repeat in another flash even then i flash to 3315.
Hwo know this problem tell me please what to do

Thank you for help.

slikmik
03-02-2003, 05:00 PM
u tried modifying the screen contrast?

Mike

galaxes
03-02-2003, 08:13 PM
No, if i not to use some point of menu (see overhand) ,phone work perfect

galaxes
04-02-2003, 04:19 PM
Who can tell me about my problem please
(after flash phone some minutes work ok, but later clear screen and all)
I earlier have problem with another phone, i set the secret code 12345 but on another day it write error code , i think it like problem, but i have not know about it.

NEED YOU HELP PLEASE
tell me please

[RedHat]
05-02-2003, 02:48 AM
Did you update FAID after you flash your phone. You must do that or your phone will reset automatically.

galaxes
05-02-2003, 01:59 PM
of course i did update FAID every times then i flashed the phone,there can be problem?

diego
06-02-2003, 01:17 AM
try to replace the LCD.

doctormike
06-02-2003, 10:26 PM
Dear friend,
I had once the same problem with me friends 3310 v 5,55, when i changed the IMEI.
The problem was solved by using Knok Phoenix 1.
Phone settings > Reset user interface settings + Reset all (UIF,SCM,... settings) + Reset DEV settings.

Try and you may be lucky;)

b0rg3
06-03-2003, 10:59 AM
@ galaxes

diego may be right, got the same problem with my 3330, but when i replaced the LCD, it worked just fine.

Lyle
08-03-2003, 05:46 AM
hardware intervention should be a last resort.
exhaust all software solutions first.

try this:
1.re-flash the phone using knok-phoenix with a virgin mcu-ppm pack.
2. calculate faid, and reset factory settings and re-enter imei using knok-phonix.

DaveGSM82
08-03-2003, 10:20 PM
I currently have a 3310 in for repair with this same annoying pain in the ass problem, the catch is I have already replaced the LCD and it worked fine.... for 3 days, then it came back. I upgraded the software and the phone works fine *as a phone* just not as something you can look at cos it has a blank display.

it ONLY goes blank when the graphics on the display are moving, ie press menu and you get your phone book, but this phone just goes blank.

Dave.

chunkhead
09-03-2003, 06:11 AM
Was the board dropped into water or knocked around at all? I've come across this problem once or twice and that was the cause! Try clean/dip the board especially the screen contactss! Hope this helps!?

DaveGSM82
09-03-2003, 11:41 AM
I dont know the exact history of the phone, its possible that it was treated badly. I will try dipping it in isapropanol but I dont know if this will help, the board looks clean, and what baffles me is that it works ok with a new screen for a few days, then goes off again.

Dave.

pico
09-03-2003, 02:51 PM
try to clean the screen contacts on pcb with an eraser.
this problem has been happening for a long time in 33xx (usually screen dissapears after enter PIN code...). solution always replace screen..

Al
09-03-2003, 05:55 PM
Hope this (http://www.uniquephones.com/nf/info/EB397.htm) helps