PDA

View Full Version : 3315 (3310 convert) shuts off when keylock activates. What's going on??



cypher1024
05-02-2003, 03:38 AM
I tried to upgrade my mum's 3310 to 3315.
Luckily I took 2 backups.
Here's what I did:
Flashed a 3310 v5.57 fls onto the 3310 with Rollis 4.78
Quick set the faid with Knok95
Clicked the 'Convert 3310 to 3315' option in the Phone Options menu in Knok95
Quick set the faid again.

Then I turned it on, and it seemed to work fine, only when the keylock tries to lock the keys after 30 sec (that was the time limit I set), the phone just turns off.
What's going on here?

Any help would be greatly appreciated!

slikmik
05-02-2003, 06:39 PM
Try setting a full factory reset using an mbus cable and/or flash a virgin eeprom :)

Good luck my friend

Mike

cypher1024
06-02-2003, 03:04 AM
Thanks for the tip slikmik, i'll give it a go!

belabs
06-02-2003, 06:28 PM
maybe you dont have any picture msg or screensavers to display
and it shuts off if its time to show the screensaver

or

try changing your profile


just a guest...(i dont have my own 33xx, just observe this from my cousin)

UKSMS
07-02-2003, 01:28 AM
Is the phone getting a signal?

If so then you may have incorrect checksums or havent updated the faid because phone will reset every 30 seconds if these are incorrect (If it picks up a signal then its not this)

cypher1024
07-02-2003, 02:51 AM
I'll have to reflash and check it out.
Thanks for the suggestions, i'll keep you posted.

chunkhead
08-02-2003, 04:47 AM
Do a Special Factory Reset with Nokia Tool by Rolis!
I've never seen this problem, but I know that this fixs the problem of " When flashed fone is locked, try to unlock and it says Keypad locked, and fone is still locked!

Just a guess! Post results when you find the solution!

cypher1024
08-02-2003, 02:15 PM
I'm pretty sure the phone has signal...
The only problem now is getting a hold of that phone. I flashed the backup I made to it, so that it would be usable until I could find a solution to the shutoff problem. When I can flash it, i'll let you know if a factory reset works.

:p
Thanks for the suggestions, sorry i'm so slow!