PDA

View Full Version : Nokia 8210 WHITOUT NET SIGNAL


||Joe
20-12-2001, 04:40 PM
Hi! I have try to change ppm language on a 8210. But the phone dont have net signal!! Can anyone tell me how can i fixe it? I think i need MCU & PPM uploder by dejan. is that right?

Thanks.
Iccang
21-12-2001, 06:39 AM
You must recalculate the Flash Authority ID. You can use the DCT Software or Nokia Logger
||Joe
21-12-2001, 08:53 PM
Ok. Here can i find DCT software or ftp looger adress 100% working.
Thanks.
Iccang
24-12-2001, 08:08 AM
try to this...

http://groups.yahoo.com/group/ucables/files/dct-nokia-flasher-4.71.zip

Regards,

Iccang
======
||Joe
25-12-2001, 11:45 PM
It asks for id and passwd. do you have one? or we must pay?
thanks!

Regards,

MOBILE
o_MAST
26-12-2001, 03:04 PM
I have DTC3 flasher 4.71 by rolis. How do I do to upgrade firmware of my 3310?

Thank you

Bye
||Joe
26-12-2001, 08:12 PM
You have the dtc3 flasher?! thatīs very good for you. I think you need MCU & PPM uploder by dejan. But thatīs only i know.
Can you give it to us? That's the only way, to now how it work's. /n/images/smiles/icon_frown.gif I supose dont do that. But, it ok. Good luck anyway.
o_MAST
27-12-2001, 05:42 PM
Ok, there is Dtc3 flasher and Dejan MCU and PPM uploader.
Can you tell me how dtc3 flasher work?

Thank You
Bye
Iccang
28-12-2001, 06:42 AM
Ok,

DCT 3 Flasher will work if you have a dejan flasher cable and your BIOS setup is ECP for LPT1.

I have many experience with this software. And I always to recalculate my result of flash with nokia logger. And it's work again. And succesfull...
||Joe
29-12-2001, 10:31 PM
Iccang? The dct 3 flasher display an error message "NOkia box not conected". I have placed ECP bios for lpt1. I dont understand. Whats wrong?

regards,
MOBILE
Iccang
31-12-2001, 08:12 AM
You must Have an external power supply for your flasher. I have a UB.3 cables. But, I just think you can try at this link :

http://groups.yahoo.com/group/ucables/files/NokiaFlashTool.zip

regards,

Iccang
======