View Full Version : Panasonic GD67 unlock working tested
Dragoncry
11-02-2003, 09:10 PM
A program for unlock the panasonic GD67 tested by Vilani:
For download this program:
http://download.vilani.com/telefonos/panasonic/Panasonic-gd67.zip
taken care of with panasonic, it´s hard of repairs.
Instructions of use:
1- Connect the cable(GD92) to our Gd-67 being this off and without card.
2- Initiate the program a click on the button Load for load the flash
3- Press the button flash and power on the phone (short time)
4- When the flash process finish,We´ll press the button SP-unlock an power on the phone(short time).
And Free
In the Vilani page.they say that there is to use a external Nourishment (9CV Battery by COM port) in unlock process.But I dont know this external Nourishment if obligatory this use.
Bye.
Hi All,
Just use normal GD92 data cable that will be fine to unlock
Software is great easy to use will unlock 1000%
Thanks
Jab:D
Ryuken
07-03-2003, 05:14 PM
Mate,have u tried it yourself?:roll:
Dragoncry
14-03-2003, 03:42 AM
Originally posted by Ryuken
Mate,have u tried it yourself?:roll:
Yes, I tried with 3 Vodafone Company(Airtel) phones...and good worked
Hi there,
I have tested this on several phones with 100% success.
I unlock phones day in day out.
Thanks
Jab
Please I need help desperatly with repairing GD67. I have used the Spunlock software to unlock a GD67 on Virgin network. Phone Flashed Ok but when I press unlock it comes with error message 'Read IMEI fail and on the phone it displays 'System Error 60010006 L1A: DSP HWT. EST: BAD CHK SUM' The phone now just powers on/off all the time when I press power switch.
Please I need help urgently.
Thanks
msa
try to repeat everything from the 1st step maybe this will help
Originally posted by Dragoncry
Yes, I tried with 3 Vodafone Company(Airtel) phones...and good worked
tell me what was the firmware versions of these phones, i've got one gd67 but i still have bad memories from destroying a gd93 when i tried to unlock it
Hi All,
100% Repair Solution For New Dead Gd67 !!!
to refix new GD67 with new flash partialy dead after flashing here is the full working solution:
-http://xenko.free.fr/gd67fix.rar
- go to the above site u have the full pack to repair u're dead GD67.
- decompress the file
- FULL CHARGE THE BATTERY BEFORE
- Run WINMODO
- select the flash file ( GAD67A29.rel ) no need LP
- upload the file in to the phone ( phone must communicate! )
after flashing the phone it should be alive ! but still locked
don't forget to rate me
:cool: :cool:
2- Initiate the program a click on the button Load for load the flash
3- Press the button flash and power on the phone (short time)
4- When the flash process finish,<- will the phone switch off after flashing?< We´ll press the button SP-unlock an power on the phone(short time).
And Free
Janus
31-03-2003, 07:58 AM
Jab I've got a question for you,I have a GD67 dead after unlocking,I downloaded GD67fix,but when I try to unpack the file I get a message:PACK METOD NOT SUPPORTED,FILES CANNOT BE UNPACKED! wich program unpack this files?I try all WinRar progs but still no success?Can u help me?
Janus
31-03-2003, 08:03 AM
Jab I've got a question for you,I have a GD67 dead after unlocking,I downloaded GD67fix,but when I try to unpack the file I get a message:PACK METOD NOT SUPPORTED,FILES CANNOT BE UNPACKED! wich program unpack this files?I try all WinRar progs but still no success?Can u help me?
dogbert
31-03-2003, 10:43 AM
@ Janus
What version of WINrar are you using?
If it is pre 3.0 you may have problems.....
Cheers
Dog
Janus
31-03-2003, 03:08 PM
I use WinRar 3.22 beta still can't unpack files!!!Any idea?
worked for me with winrar 3.0
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.