View Full Version : soft problems
jak2812
16-02-2003, 08:53 PM
hi
several questions
if i have one phone that not works nothing, and is sw problem, what must i do?
to flash the phone with full flash?
what is full?, eprom+mcu+ppm?, mcu+ppm?
i ask this because i had one 7110 that not work and i repair with full flash (eprom+ppm+mcu)
now i have one 3310 that not switch on and when i look for a full flash i find a lot but when i see the adresses is not full is the direction of mcu+ppm.
then what can ido?
with mcu+ppm i solve the problem?
do i need eprom+ppm+mcu?
thanks to all the answers
brads26
16-02-2003, 10:56 PM
Which software do u use for uploading the flash files??
I have tried several on my laptop but none seem to have upload facility.
I would prefer to use XP if possible.
Many thanks
brads26
Manipulator
17-02-2003, 02:37 AM
@jak2812
you can write mcu+ppm and the eeprom separately in to your phone,
so,download the mcu+ppm that you want,and eeprom for 3310.
mcu+ppm 200000-3D0000
eeprom 3D0000-400000
cypher1024
17-02-2003, 09:27 AM
The eeprom start address depends on how old the phone is.
jak2812
17-02-2003, 08:49 PM
for brads26
i use rolis 4.78 with w98, i don't know xp
for manipulator
i use rolis 4.78 for flash, i select ppm and mcu or full flash
how i select only the eprom?, and, is a virgin eprom good for that?
is necesary one special eprom?
thanks a lot
brads26
17-02-2003, 09:14 PM
I have tried rolis on my windows 98 laptop, but when i try to do any action, it comes up with error
Power OFF mobile first and then connect
(Or check cable : phone TX=low(0) expected but phone TX=high read)
I can communicate with logomanager, dct3 (not flash) and etools.
So i presume my cable is okay
brads26
Do you have flash cable connected to LPT port???
PS sorry for stupid question :)
brads26
17-02-2003, 09:55 PM
No I have it in the com2.
I have just been trying dct3, it seems to talk to phone on some menus but not on others!!
Dont you hate newbies!!
All I am trying to do is unlock an 8210, as the wifes doesnt show O2 but mine does, and then I want to upload or modify the firmware to include the fading LED's.
Two so called simple operations.
Thanks again
brads26
If you want to flash phone you'll need a flash cable, connected to LPT port (search forum for it) and that's not M/FBUS one.
brads26
17-02-2003, 11:04 PM
Does this mean i can unlock phones with a F/Mbus cable?
If so, which is the best software?
Thanks again for your help.
Brads
Flash cable to be bought shortly dont leave town!
You can unlock phones with MBUS cable
Bset software: Rolis NokTool v1.9 (http://www.uniquephones.com/nf/files/NokTool_1.9_w_IMEI.zip) or Jordik Nokia Tool v3.25 (http://www.uniquephones.com/nf/files/NokiaToolv325.zip)
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.