ericsson t68i security code.

[ace2k1]

can some please help me, i need to take the secuirty code off my t68i, ill be very grateful if anyone can help and give me instructions of how to do it.

[ace2k1]

its a t68i on o2 and ive forgot the code,

[moustafatch]

the same proplem for me plz some one help i try to insert sim card and ask me enter phone code.

plz i need help

[jagajutt]

try 0000 - i think this is the default value for the security code
No promises

[arom2k3]

the default security codes are 1234 or 0000. if your phone is a new one and you are the original owner, then you will have NO problem, but if you're not the original owner and its security codes are changed by the 1st owner, you have a big problem! If the two codes fail, then it is best to go to Ericsson Center.

[Fonefingz]

just download the logger from a website, pay for 1 log and you can do it like that.

[moustafatch]

i already solve the proplem and i buy the logger.

if u want to solve ur proplem contact me private.

ICQ : 111473016

[kevinn13]

ACE JUST GO HERE

www.mobile-doctor.co.uk

It will give you the security code from the logger in the remote unlocking section.

[ace2k1]

thankyou everybody for your help.

[superman]

i use the termintor 2.0 and it will reset the code, next timew u switch on the phone it does not even ask for the lock code anymore.

[Lucas]

Superman, I've got a question. I've just made terminator dongle, I heard that only terminator 1.8 works, and upper versions just kill phones. What would you say about that ?

[superman]

my terminator 2.0 did not kill any phone yet and I did a view of each t68m , t68i, t200.

[ace2k1]

hi, superman can you give me a copy of terminator please, and do i use a standard t28 cable?

thanks in advance.

[Lucas]

can you post here 100% working scheme - without any mistakes... my dongle does not want to work

[superman]

u need the dongle too, terminator does not work without the dongle, my dongle has a space for a sim card but none is there and it works very good, reset user lock too without any problems. here is my terminator 20. Again, it wont work without parallel port dongle.
No it uses not standard t28 cable but t28 connector which is attached to a cable and leads into the dongle atached to the parallel port.

file 257 KB big

[Lucas]

I have this soft. I need working scheme and hex for that dongle !

[superman]

previous post was for ace2k1