insert correct card on T10

[ndagi]

Anyone know what to do to a T10 that diplays 'insert correct card'
even when theres no sim-card present in it!
kinda confused
ndagi

[Stopper]

Use Universal SP unlocker 4.38
and flash the phone
If you have the same - try with difference flash file or use correct eeprom.

[Alinus]

use zulea atr 5.3

press repair phone,
after flash it with flash for t10

unlock it
and u will have a working phone


be carefull of what type of phone u sellect in atr 5.3 - it must be T1x

[paolo]

Tampered phone!!!!!!!!!!!

sorry this is for a1018.

[Alinus]

PAOLO!!!!!!!!!!!!!!!!!1

TETRIS FLASH IS FOR ERICSSON A1018!!!!!!!!!!!!1

U WANNA MAKE HIM KILL HIS PHONE?????????????????

[superman]

flash it and unlock again with atr53

[paolo]

soory i was wrong about my attachment..that attachment is a1018..again soory..thnks you for correcting me...ok..pls be infomed..Again thank you very much m8..

[jab]

Hi Ndagi

Email me i will send you a flash to go with zulea 5.3 for your T10.

Thanks

Jab

[psion]

hello evry body
i have a t10's r1a 99w42 i flashed it a million time but it always shows (insert correct card) :confused: i search for flash r1a and i don' t found it please if you have a solution tell me i don't now witch eeprom and flash to use
thank you

[superman]

flashing does not unlock this T10 u must use atr5.3 after flashing and use the unlock option. But when flashing u must flash and do the e2 too, both from the same good working T10. And for writing both use varanius11 or flasher_by jethro_final not atr5.3 use atr5.3 after restoring flash and e2 to unlock only.

[psion]

thnx for you replay but witch flash and eeprom to use??? :confused: i dont find the r1a in the net please expliane to me carfuly and thank you very much

[Alinus]

i havve repaired manu t10 with insert correct card message with atr 5.3

firts u must use option repair phone, and after u must flash

[Osman]

u must re flash from ER200 or SFR

[Osman]

u must re flash from ER200 or SFR

[psion]

thank you for the information but i have read all the post about t10 insert correct card and i flashed it with all the flash i have found i used atr 5.3 and jethro and varanius11 the flash i us was 10_125112_saras.biN In990723.r2a n990917.r3a in000114.r4a xxwest.rxx and always the same thing insert correct card the version of my t10 is r1a 99w42 please show me what i have to do to make it work
and thank you for your reply and for this forum