PDA

View Full Version : Many Sagem Faults, Pls Help



dannyogolo
25-02-2003, 10:22 AM
Dear Sagem Gurus,
I got sagem software and I think it looks good, but I dont Know how to use them.

I have many sagem problems:

1. MC920 Shows Sagem then Goes Off almost immediately.
2. MC920 Shows SIMLOCKED even when there is no sim inside.
3. MC3000 shows SIMLOCED also without sim.
4. MC920 Shows PB IMEI.
5. How do I check Sagem phones firmwarte Version.

Just for your information, I have Pony Prog, but I do not know how to use it.
This is in case you may ask me to get it.

Pls be patient in answering me, as I am aware this is going to take your
precious time.
The truth is that I am not yet matured in the repair of Sagem phones, maybe
You will make me to.
Pls I am eagerly awaiting your reply.
Much thanks in advance.

Dannyogolo
Nigeria.

hrco
25-02-2003, 11:05 AM
If I remember all...
1. you have only one way to try repair this phone....
you must upload new eeprom whit eeprom programator in eeprom and repair checksume whit drsagem!....If you don't have result after this....I think the board of your phone is broken!
2.I think is mc3000!
Becouse you can't edit all eeprom field whit cable...only trick is try the change field 0...only last byte in field 0 try change in "00"...then try repair checksume ....
3.MC922 simlocked.
Repair checksume whit drsagem....but the best way is first read ID whit boot strap mode tool by pro....
4.MC922 PB eprom.
Upload in eeprom new bin whit progrmator and then repair checksume whit drsagem!

If your mc922 sagem have version s6 and s6 you can't repair simly in drsagem....becouse in this version have protected field in chechksumu...and you hvae 2 option repair checksume manula in the bin file and after upload fixed bin in epron(whit programator), or second one,.....flash you phone and whit this flashing remove protection for field!
But when you flash your phone you can't be 100% in succes becouse you can demage your phone!I broken 2 phones whit flashing!So your phone your way....:)


That is all ....:)

dannyogolo
25-02-2003, 05:06 PM
Thanks for your reply but what is a programmator?
As I said I am new in Sagem repairs.
Also how do I repair checksum, and with which software?
Thanks for your reply anyway.

Dannyogolo

hrco
26-02-2003, 02:20 AM
progrmator...is new interface which you must made if you whon reapir your phone......
The simply is ponyprog...go to www.google.com
And write ponyprog...and you will finde free shema and free sw for you eeprom pragramator.....when you build interface then post and I will explait procedure....

dannyogolo
26-02-2003, 11:07 AM
Thanks for keeping the faith.
But I do not know how to build an interface. Can I buy it from any website?
Pls recomend. Thanks again.

dannyogolo

hrco
26-02-2003, 02:42 PM
www.google.com
and write "ponyprog".....and foud some web which you can buy ...interface....
But you must manual connect eeprom in your phone and if you not shore better leav to expert...!

dannyogolo
27-02-2003, 11:13 AM
Dear Mr,
Take a look at this page if it is the Eeprom programmer you talk about.

http://www.ucables.com/ref/EPM-PROG/
A colleague of mine has it, He bought from Ucables.
If it is this the we can go ahead, I fear no job!!!!.

Thanks again.

dannyogolo

hrco
27-02-2003, 02:23 PM
You finde right .....
So buy it...and direct write new bin in eeprom...and repair checksume.....
Good luck!

SWAT_Unit
08-03-2003, 09:21 AM
Hi hrco

If the MW930 show PB IMEI
not PB eprom.

Is that just use the drsagem
to write the field 0 to phone?
thx

hrco
10-03-2003, 03:50 PM
Is same error....
Something change in eeprom field....on your lucky you can comunicate whit your phone whit data cable for sagem phones...so you can direct repair your error...you don't need eeprom programer..

dannyogolo
26-03-2003, 10:05 AM
Pls check and see if this cable can also do the job.
I am having problem securing that cable I directed you to.
I wonder if this new eeprom programmer cable can do the same job.
Thanks.

dannyogolo

spectrum
31-03-2003, 04:20 PM
Yes it can.
You need to read the manual for the programmer
Good luck!

dannyogolo
01-04-2003, 04:06 PM
Hi,
sorry to other users, but I need to find out my man!!!!!

Spectrum, is it Mr Adekunle, its me Daniel, from PH, nigeria.
Reply ASAP.

spectrum
02-04-2003, 11:20 AM
Yap

dannyogolo
30-05-2003, 02:40 PM
Hello friends,
I have finally gotten a reliable source and ordered for the
eeprom programmer from www.gsm-technology.com, and will take delivery by tuesday or wednesday.

Pls can U pls teach me how to use pony prog or ic prog to repair
these sagem phones?

Many thanks.

dannyogolo