1ST
16-02-2003, 11:04 PM
Hi ALL Members
Becaouse I Got Alot Of E-mails Asking Me About The Complete Guide In How To Use Wray's Alcatel Software I Have Decided To Write Almost Every Thing In Safe Steps To Make Sure That You Wont Fuck And Kill Your Phone , Please Read Carefully And Dont Send Me Any More E-mails Becaouse Iam Verey Bussey.
First Step After Clicking Connect Is Backups Press It 3-5 Times To Backup The Teh Zone (Technical Zone Area) , The Technical Zone Is The Most Important Thing In The Alcatel Mobile Phones .
Seconed Step Is Make Sure That The IMEI Wich Is Displayed In The Software Is The Same As The One On The Back Of The Phone (Just Incase)
Now We Have To DIcide If We Are Going To Write Language Or Change The Firmwere For The Phone Or Any Thing Ells.
For Changing The Phones Firmwere Do The Following Steps :
Write A Good Flash File To The Phone By Clicking Write Flash Function (To Make Sure That The Flash File Is Good Use Correct Checksums Button ) After Writing The Flash To The Phone Dont Power It Press Change IMEI And Change Atleast One Digit Of The IMEI After That Dont Power On The Phone!!! Just Insert Sim Card In The Phone And Then Power It On (To Update The EEprom) For 5-8 Secondes And Then Turn It Off And Reconnect The Phone To The Programe And Click On Patch Firmwere And Choose The Phones Teh Zone File (The File Must Have The Same IMEI That Was On The Back Of The Phone ) After Patching If You Need To Change The Language Use The Write Language Button And Write The Language File (Make Sure That The Language File Is The Same Version Of The Flash On The Phone That You Have Just Wrote It ) And Finaly Click On Fast Unlock Or Unlock And Disconnect The Phone Power It ON (With A SIM Inside) Press ###847# To Restore To Full Factory Settings (Use This Function If You Had A Bad Contrast Or Something Ells.
If You Want To Change The Language Only Just Click On Write Language And Write The Language File Of The Same Version On The Phone And You'll Be Done.
For Version 253 After Unlock Do Not Disconnect The Phone Just Click On Change IMEI And Change At Least One Digit Of The IMEI And Then Disconnect The Phone , If You Didnot Change The IMEI You'll Get A Dead Phone Becaouse You'll Lose The Teh Zone Just Do As I Say ;)
If You Have A Dead Phone Allready And You Want To Revive It Follow These Steps :
Connect The Phone And See Under The Phone ID Filed If The Phone ID Is Shown Or Not !!!!! If Its Shown Then It Can Be Revived By Following The Steps As In Changing The Firmwere ,
If You See In Phone ID (UNKOWN) Then Your Phone Wont Be Rivived But If You Followed The Changing Firmwere Steps You Will Get Insert Sim Card Even If There Is A SIM Inside The Phone .
Finally Some FAQ And There Answers :
Q : I Have A Massege Like This (Warning Driver Not Found) When I Run The Software Why!!!!
A : Becaouse You Are Using Win2k Ex (XP,Win2000,NT) So Please Use WIN98SE To Avoide This Massege.
Q : I Have Allways (Commenication Error ) Massege Why!!!!
A : Make Sure That You Are Yousing The Correct Cable And Your PC's Speed Is More Than 600 MHz And And Your Phones Battery Is Full And Check If The Cable Is Conected To The PC.
Q : Does This Software Unlockls 15A !!!!
A : No This Software Dosent Unlock 15A Version Unless You Downgrade It And Then Unlock It.
Thats All Now If You Need More Help Just Post Here And Please Dont Send Me More E-mails Asking About Help.
Thank You Members And Take Care Using This Software Becaouse Its Not A Game As Some Members Think :D
Best Regards -=1ST=-
Becaouse I Got Alot Of E-mails Asking Me About The Complete Guide In How To Use Wray's Alcatel Software I Have Decided To Write Almost Every Thing In Safe Steps To Make Sure That You Wont Fuck And Kill Your Phone , Please Read Carefully And Dont Send Me Any More E-mails Becaouse Iam Verey Bussey.
First Step After Clicking Connect Is Backups Press It 3-5 Times To Backup The Teh Zone (Technical Zone Area) , The Technical Zone Is The Most Important Thing In The Alcatel Mobile Phones .
Seconed Step Is Make Sure That The IMEI Wich Is Displayed In The Software Is The Same As The One On The Back Of The Phone (Just Incase)
Now We Have To DIcide If We Are Going To Write Language Or Change The Firmwere For The Phone Or Any Thing Ells.
For Changing The Phones Firmwere Do The Following Steps :
Write A Good Flash File To The Phone By Clicking Write Flash Function (To Make Sure That The Flash File Is Good Use Correct Checksums Button ) After Writing The Flash To The Phone Dont Power It Press Change IMEI And Change Atleast One Digit Of The IMEI After That Dont Power On The Phone!!! Just Insert Sim Card In The Phone And Then Power It On (To Update The EEprom) For 5-8 Secondes And Then Turn It Off And Reconnect The Phone To The Programe And Click On Patch Firmwere And Choose The Phones Teh Zone File (The File Must Have The Same IMEI That Was On The Back Of The Phone ) After Patching If You Need To Change The Language Use The Write Language Button And Write The Language File (Make Sure That The Language File Is The Same Version Of The Flash On The Phone That You Have Just Wrote It ) And Finaly Click On Fast Unlock Or Unlock And Disconnect The Phone Power It ON (With A SIM Inside) Press ###847# To Restore To Full Factory Settings (Use This Function If You Had A Bad Contrast Or Something Ells.
If You Want To Change The Language Only Just Click On Write Language And Write The Language File Of The Same Version On The Phone And You'll Be Done.
For Version 253 After Unlock Do Not Disconnect The Phone Just Click On Change IMEI And Change At Least One Digit Of The IMEI And Then Disconnect The Phone , If You Didnot Change The IMEI You'll Get A Dead Phone Becaouse You'll Lose The Teh Zone Just Do As I Say ;)
If You Have A Dead Phone Allready And You Want To Revive It Follow These Steps :
Connect The Phone And See Under The Phone ID Filed If The Phone ID Is Shown Or Not !!!!! If Its Shown Then It Can Be Revived By Following The Steps As In Changing The Firmwere ,
If You See In Phone ID (UNKOWN) Then Your Phone Wont Be Rivived But If You Followed The Changing Firmwere Steps You Will Get Insert Sim Card Even If There Is A SIM Inside The Phone .
Finally Some FAQ And There Answers :
Q : I Have A Massege Like This (Warning Driver Not Found) When I Run The Software Why!!!!
A : Becaouse You Are Using Win2k Ex (XP,Win2000,NT) So Please Use WIN98SE To Avoide This Massege.
Q : I Have Allways (Commenication Error ) Massege Why!!!!
A : Make Sure That You Are Yousing The Correct Cable And Your PC's Speed Is More Than 600 MHz And And Your Phones Battery Is Full And Check If The Cable Is Conected To The PC.
Q : Does This Software Unlockls 15A !!!!
A : No This Software Dosent Unlock 15A Version Unless You Downgrade It And Then Unlock It.
Thats All Now If You Need More Help Just Post Here And Please Dont Send Me More E-mails Asking About Help.
Thank You Members And Take Care Using This Software Becaouse Its Not A Game As Some Members Think :D
Best Regards -=1ST=-