Nokia 3330 wont flash

[RichR]

Hi having a slight problem with a 3330,i have allready flashed this phone before with nok 22 and sw v506 and phone worked ok except with charging.So i searched for answers on nokia free and read that that sw version had bugs, so i did a back up of my other 3330 and tried flashing it to the phone and thats when all my problems started.Now when i try to flash the phone i get this.

FLS1_ConfigurateBootstrapDCT3 : checksum is 4A8B
FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
FLS1_GeneralSendBootstrapDCT3 : bootstrap seems to be running
FLS1_PreparePhone : invalid NMP returned in phone RAM
FLS1_PreparePhone : detected NMP is NHM-6
FLS1_GeneralSendAlgoCodeDCT3 : checksum is 59D6
FLS1_GeneralSendAlgoCodeDCT3 : algo code seems to be running
FLS1_Write : written block (4 bytes) starting from 00200034
FLS1_Read : read block (256 bytes) starting from 00200000
FLS1_Write : written block (4 bytes) starting from 00200034
FLS1_Read : read block (256 bytes) starting from 00000000
FLS1_Write : written block (4 bytes) starting from 00200034
FLS1_Read : read block (256 bytes) starting from 00000020
CMD_handlecommands : cannot analyze phone

I have also tried reflashing with sw v506 and a virgin eeprom and get the same thing.
If somebody could help me i would be very happy.
Thanks Richard

[lonegunman]

Try diffrent flashing software, if still not working I can sort for you.:D

[RichR]

Hi thanks for your reply, i have tried different software but no luck can you let me know what will cost to sort out.
Thanks
email me: [email protected]

[lonegunman]

OK sending mail.:D

[fatahillah]

hi.... lonegunman.......
I have the same problem.!!!!! could U send me to...
the sort....please.....

Dan13L ([email protected]):(

[Monkey_Zu]

if you are using knok-phenix (knok95), select "don't erase before write", sometimes works with that problem.

[ximon]

i had this problem and used rolis 4.78 and it worked first time! try it

[lonegunman]

His phone is now working and on his way back to him.

(PS not a software fault it was a faulty battery connecter)

[RichR]

lonegunman knows his stuff, sent phone on saturday got it back on wednesday all sorted. Somebody you can trust, i would use again.
Thanks Again RichR

[DaveGSM82]

for future reference this problem can usualy be circumvented by starting your flash application, then instead of pressing the power, plug in an ordinary nokia charger, this provides power for flashing incase the battery connector is duff.

dave.

[lonegunman]

Very true, (as I did that first) and still got no power on, then I went looking and found the fault.