6210 ,help needed

[murrayb55]

I just got 2 6210's in, and both are orange mobiles,dont know if there blocked ect as they wont turn on, 1 has a red leds ,the other just normal.

the 1 with red leds i was told it came up contact service then powered down,
I tried using rollis 4.7 to read the phone but i got a message ram error.cannot prepare phone,i have had it to bits,and re built.and i got a small power on,flashed then switched off.

anyone have an idea of what to do to bring this one back.i have rollis,knok,eeprom tools,and a multitude of other apps, cheers to all how look ,and try to help.

cheers

bjm

been trying to use rollis 4.78 to read/write a flash,and this is what i get.
Phone not put,Tx line low for bootstrap begin.

I also tried Knok and got this message.preloader init error,phone ram is bad.and it says selected wrong type of phone,but of course i have.

can any one shed a little on this i would be greatful.
thanks

i have flasher set ,and a m/f bus set,but the connector for the 6*** is not m bus.Please help.

[SKIRLYBOB]

hi ive ad same problem but now av a neelix box which can bring dead nokias bac to life works 100%

[murrayb55]

thanks for the info.but i am afraid that the neelix is a bit to pricey for me.
thanks all the same

cheers

[SKIRLYBOB]

i think unfortunately neelix is the only way back and what do u call pricey

[ghostmola]

use eeprom-tools 4.0 to investigate the possible errors...
www.b-phreaks.co.uk (http://www.b-phreaks.co.uk)

[murrayb55]

@ghostmola

got that software ,but cant switch on any of the phones.
thanks all the same,unloess there is a way to get eeprom tools to read a dead phone, let meknow ,thanks

[ghostmola]

- switch on the phone
- connect the mbus cable
- start eeprom-tools
- click on then test check box
a windows appear telling you a reason for the phone failure

[murrayb55]

i just get an error,saying.

error can read test's.

I still think the prob is that there is no power to the phone,and when i read it with rollis, i got a phone ram is bad.

might just sell them.

cheers

[murrayb55]

@skirlybob

i thought neelix was a sepearte software,and different cables.
i have flasher cables,and a set of dual m/f bus.

if they would work were could i download it.please let m eknow.thanks