PDA

View Full Version : 3310 why cant read my flasher



||Joe
24-09-2001, 09:45 AM
Hi,

I use Dejan 1.0 and an Intel PI. desktop to flashing.
3210, 5110, 6210 never flashing problem, but any 3310 ever cant read:(((

I tryed 3 type boot.bin (964, 86x, 85x byte long one) but progs answer: phone dosent respond, TX=0 somtimes TX=1

I think that is an Atmel flashcship but combination of boot.bins with different f_loader bins (also Atmel one) also dont work!
I just cant get the Flash-ID:( So I think the prob is the boot.bin file.

What is the hell the reason? My computer chipset?

Does anybody tell me a flashing configuration for 3310s with PI. PC and Dejan 1.0 or any other working solution?

||Joe
24-09-2001, 09:53 AM
There's another commonly used boot.bin file it's 808 bytes. You might want to download this.
If that doesn't work, try pushing down on your battery once the cable is put on the phone as sometime people have problems with connections.
If that doesn't work, I would get the cable exchanged. I personally can't think of any other reason why it wouldn't work if it works on other phones.

||Joe
24-09-2001, 01:44 PM
THNX

But the connection is work, I think.
I have used logomanager whit that cabel (it is a multi changebel cabel head), and worked perfectly. After, I linked the 3310 cabel head to the mainflasher cabel, and didnt work. But the mainflasher cabel work good with other heads (3210, etc.)

Where I can download from that boot.bin?

NokDoc
24-09-2001, 08:10 PM
Works for me...

||Joe
30-09-2001, 01:05 AM
when i tried to used noktoll , i push reset phone button then aftar that my phone display simcard not accepted . how to make it back to the old condition.

thanks