Sagem Gurus Pls Come In

[SWAT_Unit]

MW930 when open the phone show
reading err.
in log

writing err.
in log

PB IMEI
can write *#(7digit)

when i press *#06# it show
reading err.
0

i already read the field 0
it is ff ff ff ff ff ff ff ff 00
how it be come?
where is the original IMEI
(back cover is real?)
i use sagemdr 1.4f write the
new field 0 to phone(calculator from back cover imei)
than can't verift checksums,say
phone version:FM,1i:250400 1028
new firmware version,can't work...

How do repaid this phone.
Much thanks for reply.

[legija]

Write new bin to eeprom, you may need to replace eeprom - it may be broken, or damaged. Use only sagemdr 1.4C+, and find some1 to recalculate field 5709 for you.

[SWAT_Unit]

i don have interface to write the eeprom
i use sagemdr 1.4C to read field 0
it have 32 byte!!!(is that normal)
i change it to 9 byte n write the new field 0
but the phone also show PB IMEI
than verift checksums,
1)find phone id
1)field 191 checksums invalid
2)use standard values for lock
field 191 chksums correct
field xxx also use standard to correct chksums
but in field 5250 say:
how many fields are checkum-protected?

have anybady know what going on

[hrco]

Try change IMEI in any other imei.....ANY.....read on the forum and change imei in drsagem......after press yes(you whan to change imei)....in checksume reapair whit option "1"...and for field 191,251,252 and 253 use standard lock value....!
And this is all...after this your phone working but is locked...post logg and I will give you unlock codes....

[SWAT_Unit]

THX hrco

i will try to write other IMEI
until the phone back to work.