View Full Version : how to check S40 software version ?
newbie
19-03-2003, 06:53 PM
I want to check my S40 software version but I don't know how. Could somebody please help me ? I don't have cable neither ....
GospoPL
19-03-2003, 09:33 PM
you have to write: *# 06 # and then arrows.
newbie
19-03-2003, 11:29 PM
That shows IMEI....but thanks
danguba
20-03-2003, 12:00 PM
Yes that is IMEI, but if you then clik the left arrows under displey you get version
newbie
20-03-2003, 02:44 PM
I tried but won't show software version.... USA phone. Thanks
phonedudes
30-03-2003, 10:05 AM
You must have a Sim Card in the phone and it WILL show the software version, unless you somehow have very old v2.x software (x<8)
newbie
30-03-2003, 03:36 PM
Thank you. I think they have very old version. I tried with & without SImcard..... One more question, Do you have pinout for S40 cable ? I bought one from Ucables but It didn't work, I don't know that is cable problem or software problem
Alinus
31-03-2003, 01:03 PM
best soft for s40...
but be carefull u might get burned if u play with fire...............
spectrum
01-04-2003, 10:50 AM
Thx for the software.
But can you tell us the pitfalls? and what to do when using this software?
phonedudes
01-04-2003, 12:44 PM
One other thing... We forgot to correct the posts by danguba
and GospoPl
Be sure you are using the buttons on the SIDE, NOT the FRONT!!
We haven't seen a s40 in circulation with that old of software for ever so let us know if that works..
In OUR experience we never were able to get ANY of the aftermarket cables to work.. NOT saying they dont because others have.. Its just such a shoddy phone we opted for the OEM cable because we did A LOT of flash updates for them and didnt want to screw around.
One key thing seems to be that the cable MUST be a POWERED cable...
You may also have to pop the battery in and out and unplug the cable and plug it back in WITH ALMOST all the software for it to work sometimes.
newbie
01-04-2003, 03:08 PM
You are right. I can read it now by using side button.... thanks. I am very new on seimen. I will need alot of help...:)
Nathaniel
06-04-2003, 07:50 PM
please tell us pitfall in S40 workshop soft.
Alinus
06-04-2003, 09:15 PM
what do u need to know?
Nathaniel
06-04-2003, 09:42 PM
i have not actually use the soft . b`cos of the warning you gave intially.(playing with fire)
or is it a general advice.
Alinus
06-04-2003, 10:17 PM
the software is very reliable...as long as u have a history with phones...and u know how to use it...
it can unlock, repair, change firmware, languages, upload eeprom, upgrade/downgrade firmware...and many things...
very easy to use...
the warning was for those that are not experienced...
Nathaniel
06-04-2003, 10:32 PM
Thanks a lot for your advices. i appreciate that.
can we have a chat.
My ICQ:332667838
my s40 cable can not connect with this soft i need a help how do i use the side buttoms
Powered by vBulletin® Version 4.2.0 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.