Siemens A 35 flash problems

[jerrel]

Hi guys,

I flashed my siemens with a lower software version, because i didn't have the right one at the time to try and unlock it.

Sinds the last flash, the phone went dead, and if i try to flash it with the right software now, the flash proces gets stuck at a certain point. i tried unisiemens & allsiemens unlocker

I need all the help i can get.

What can i do.


Thanks

[Alinus]

use ksie 5.1 to flash the phone.

and charge battery....flash it with full charged battery

[jerrel]

I already did,

I receive the following message
=======================
COMM_LoadBoots : selected phone family is 1
TTY_OpenCOMPort : opening COM1
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_LoadBoots : internal loader version is 00.01
COMM_LoadBoots : found SIEMENS A3x lg4 v20 (1)
COMM_LoadBoots : flash ids are 008988C0 [008988C0] - F201
COMM_LoadBoots : phone ids are 59766271 [FFFF4A4C]
COMM_Write : using E:\UNLOCKSIM\SIEMENS\FLASHES\A35VERS28\SIEMENS A3X LG4 V28 - 00C00000.FLS
COMM_Write : startaddress is 00C00000 end is 01000000
COMM_Write : adjusted startaddress is 00C00000 end is 00FFFFFF
COMM_NormalWriteFlashBlock : write is not accepted
====================================

What do you think the problem is ?

Thanks

[Alinus]

really i do not know...


u can also try this software...

flashes for this u can find on www.henrichsgu.sk

[jerrel]

i read some where that i probably need to reset the erprom.
i don't know how, do you.

I'll try the prog you mailed me, and i'll let you know

Thanks

[Alinus]

indeed...

after a full flash u need to write a map to the phone and reset it in this way to factory settings

[jerrel]

He guys,

Thanks for all the help.
My phone is alive again.
It was the battery that was to low to walk true the flsah proces.

Thanks

Jerrel

[Alinus]

always the battery on this siemenses...