Nokia dct3 flasher by Rolis 479b001

[Harry224]

Hello all,

Rolis dct 3 flasher software with support for 3315, 3410, 5210 and mbus software.


Enjoy!


Harry:) :) :)

[sm@sh]

Can somebody confirm that this version works okay with 5210?

[thanasis]

thank you !!!!! :D

[sm@sh]

Successfully updated 5210 MCU+PPM to ver. 5.25. Thanks Rolis!

[BOEBOE]

I get error: Mobile not connected....
But with Noktools it works fine

[ahib]

is this version really by Rolis or modified by someone else?this version still has info on partial flashes etc in the 'about' tab also I cant get it to work with MBUS?anyone?

[jusluke]

works fine with 5210. but tried to upgrade 3610 using 3330 model i got "error erasing flash". il try to flash using 5210 model later:)

pls feedbak if you tried a 3610? thanks

[belabs]

i got no other problems flashing 5210 using Knok95 other than being so slow.

i use this sw and i got "Flash erase check..."

Flash erasing error.
91 00 FF expected, butt FF FF FFreceived
Seems,that loader can not erase whole flash
Check Vpp, Vbat voltage, phone type...



any idea how to get it work?...thanks!

[Vinny]

Try increasing/decreasing the delay in the setup.

[Velo]

I had same problem with 3410 (flash erasing error bla, bla...). I broke fls file with DCT3 Converter (download it from gsmschwantz.com) into separately PPM and MCU file ;). After that, load both of these files into flasher and that's all ! :cool: After flashing, do ONLY ONCE update FAID !

NOTE: Before breaking fls, fix all checksums into the same prog, it has ability to analyze fls file and fix it, if you need it. ;)

[Romeo26222]

Originally posted by belabs
i got no other problems flashing 5210 using Knok95 other than being so slow.

i use this sw and i got "Flash erase check..."

Flash erasing error.
91 00 FF expected, butt FF FF FFreceived
Seems,that loader can not erase whole flash
Check Vpp, Vbat voltage, phone type...



any idea how to get it work?...thanks!

I have the same problem..I prefer to use knok..it is low but works100%:D

[belabs]

Originally posted by Vinny
Try increasing/decreasing the delay in the setup.

no good! even changing the LPT mode. anyway, i still got knok,

thanks anyway for your help.

[Velo]

People, new Rollis sw iz OK, but it seems cannot flash phone with *.fls file. It seems to be problem, but it CAN flash phone with MCU and PPM, separately. So, Wintesla format is supported. Here is program which do it.

[madmania]

i use this sw for flashing 3350 with full fls file
and i got "Flash erase check..."

Flash erasing error.
91 00 FF expected, butt FF FF FFreceived
Seems,that loader can not erase whole flash
Check Vpp, Vbat voltage, phone type...

i think this software is not stable.
then I am back using rolis 478 b6. it's working fine and no problem at all.
please fix the software
and if possible add 2100 & 3610 type

thanks

[MicrostarGSM]

Please look at this link to flash your 2100 and 3610

here is the link

http://www.ed2k.com.ph/~forum/showthread.php?s=&threadid=4567

hope that it may help you to flash the 2100 and 3610

[dajoebomb]

thanks for the software, i find it works great

[Romeo26222]

Originally posted by madmania
i use this sw for flashing 3350 with full fls file
and i got "Flash erase check..."

Flash erasing error.
91 00 FF expected, butt FF FF FFreceived
Seems,that loader can not erase whole flash
Check Vpp, Vbat voltage, phone type...

thanks

yes this happens to me too..its too bad

[jspm]

Originally posted by Velo
People, new Rollis sw iz OK, but it seems cannot flash phone with *.fls file. It seems to be problem, but it CAN flash phone with MCU and PPM, separately. So, Wintesla format is supported. Here is program which do it.

no need for that
rolis had a converter built-in, just copy binary to ppm and seave it separated

[pedjulino]

Hmm sorry friends i am try flashing my 3410 but i have big problem i can't upload new flash!:(

regards