PDA

View Full Version : t191 V1.78 UNLOCK SOFTWARE



gsmsolutionsltd
31-03-2003, 05:47 PM
is any body having problems unlocking t191 v1.78 ????
i am.

can any body point me in thr right direction to find unlock software for v1,78 that works
all help i will be greatfull..

regards
CRACKER-X

jimmythebulb
01-04-2003, 10:22 AM
I have not tried this soft with 1.78, but it works with 1.82

:)

spectrum
01-04-2003, 10:33 AM
Check: http://xak.gsmunlock.sk
That should work

SmOg
06-04-2003, 10:53 AM
For unlocking do i need flash cable or sevice cable is good enough? Thx!

Alinus
06-04-2003, 12:09 PM
for t190/191 service cable = unlock cable

SmOg
06-04-2003, 12:19 PM
Ok! I just want to be sure! :) THX!

SmOg
07-04-2003, 09:14 AM
Is anyone tested T19x service software v3.01 from http://xak.gsmunlock.sk/ ?

Alinus
07-04-2003, 09:49 AM
tested and working on unlock/activate language for t190/191 all versions.

tamper alert repair working on t191. not tested on t190 (but heard that is not working)

SmOg
07-04-2003, 06:48 PM
Can u tell me more about this "activate language" ? (i didn't tested it so i dont know what is it good for)

Alinus
07-04-2003, 07:51 PM
it is used to activate languages that exists in phones flash...

(no others languages..only languages in phones flash)


first unlockers for t190/191 new versions (5.87, and 1.87) deactivated languages in phones menu...with this software u can repair that fault

SmOg
07-04-2003, 08:18 PM
Hmm thx man! How is it looks like to unlock T191. Is it the same like Nokias, or is there any tricky movement?

Thx for your help! ;)

Alinus
07-04-2003, 09:27 PM
phone must be off...

select unlock + activate languages

press do job..

press "NO" for a short time

simple as this

SmOg
07-04-2003, 10:09 PM
Thx man! ;)

SmOg
08-04-2003, 10:00 AM
It works 100% thx for ur help!

Alinus
08-04-2003, 10:02 AM
u owe me a beer

SmOg
08-04-2003, 10:54 AM
Here u are! :D http://www.beerlovercam.com/images/coorslight.jpg

stavygsm
08-04-2003, 09:45 PM
Try this:D .It is free for all!!!www.gsmwizard.com (http://www.gsmwizard.com)

Alinus
08-04-2003, 10:28 PM
my friend...

magician's software unlocks this phones...but does not activates languages in phone

NokDoc
09-04-2003, 09:13 PM
Mr. Alinus,

This Forum is becoming Shit. :confused:

NokDoc

Alinus
09-04-2003, 09:33 PM
mr. nokdoc...

that was not my assesment...was "Al"'s assesment...
my opinions were not so sharp...but i still stand for them

and sorry...i will edit my post in english

PS...good to see that someones moderates this part of forum too...

NokDoc
09-04-2003, 10:19 PM
Hi,

No problem. ;)

PS: I lied to U in my previous post.

NokDoc

Shidoshi
11-04-2003, 04:57 AM
Hmm...

Greetings and salutations.

I followed the instructions and when I insert the desired SIM the mobile sais "Incorrect SIM" and then everything appeared in Russian... How can I fix this problem???

I downloaded the program from the first link in this thread.

HELP!!!
VERY URGENT!!!

Thanks,
-Dave

Alinus
11-04-2003, 05:55 AM
the program said..." unlocking done"?
does the program read correct imei from the phone?

u must try again......

the_frightener
11-04-2003, 05:07 PM
hola folks !

i've data cable for T190 or maybe also for T191 ...but it's not working .... i don't know y ... i checked it on 191 who had a security code on it ... so i try with the unlocker software but not works...so some 1 plz guide me how can i use this cable in the future ? n what kind of software i should use ? n ya what's the service cable & unlocking cable ?

plz help ...:(

thanx in adv

Alinus
11-04-2003, 05:14 PM
this software cannot remove security code...
fot this matter u must use Dmtools 3.12, make an EEprom reset and all will be ok

SmOg
26-04-2003, 10:41 AM
Visit: http://www.unlockeasy.com/motorola/liberar_t191.htm Nice site with cool T191 softs! (Free)
Enjoy! :cool:

trini_tdma
22-05-2003, 06:51 AM
hi i have tried to unlock a t190 and accidentally pressed tamper alert repair now the phone is dead any way to recover with out having to remove the flash ic??/
thanks
in advance

Alinus
22-05-2003, 07:54 AM
sorry...
that's the only way. tamper alert repair is only for t191 in that software.