dct3 imei changer

[cspatel3333]

i need an imei changer for dct3 phones can anyone help. Also would i just be able to use the software or do i need to unsolder parts and put in a new writable chip and where would i get these chips

[paolo]

you only need data cable and noktool by rolis..wite a desire imei no. then press change imei

[cspatel3333]

thanks alot paolo only one other thing the cables i have are the adapter set meaning that there is only one wire and at the end is the extensions for different phones.
My cables for instance will not work with logomanager but work for unlocking phones will this surfice or do i need to buy individual cables

[diksonojopi]

If the cable is f/m bus (serial port) It has to work with the logomanager,
if it doesnt have a switch to selec fbus or mbus It is MBUS, may be the logomanager is not configurated to work with mbus

[cspatel3333]

thanks for the advice the cables i have are at http://www.flasherfiles.co.uk/shop/nokia_cables.htm. I have tried to use the program but it says that there is no phone detection. I have the nokia data cable kit(top of the website page). Is there any software that i could use to check the cables are working and if they are not what are common faults
Thanks

[kevinn13]

Does this work with XP?