PDA

View Full Version : 3310 no network after unlocking



simba1805
05-04-2003, 11:30 AM
i got a 3310 (ver 4.24) that i've unlocked with rolis 1.8 , but after introducing simcard and chossing network coresponding to the simcard manualy , i got message (access denied), and trying the same simcard into another phone it works correctly .

whats going on ????

omoboriowo
09-04-2003, 08:39 AM
Use eeprom tools to reset lock and recalculate phone id.

NDI
11-04-2003, 07:18 PM
yea i've got the same problem with a phone i bought off of a mate

Basicly, when i shove ANY simcard into it, it gets a signal for 5 seconds, then dies

I have a flasher cable and an mbus/fbus cable, but both for different phones :p

I'm going to buy a flasher cable for all phones one day lol

ang_panday
12-04-2003, 01:45 AM
from what i've encoutner the 5 second signal disapears, coz your phone might be blocked

NDI
12-04-2003, 10:13 AM
Indeed..

But if i change the imei, i get the same problem

yeldar
13-04-2003, 11:02 PM
Could be that the FAID needs to be updated!!

Use eeprom tools and click on the magnifying glass - this will update FAID.

Otherwise you can use eeprom tools to run a test by ticking TEST box on right of screen!!

Good luck :D

syed
14-04-2003, 03:03 PM
no friends signal loosing is becoz of hardware problem and not software and if u r not getting network after unlocking u need to update FAID to get network ......

Buer
17-04-2003, 02:41 PM
i'm also facing the same problem....
i'm using rolis 4.78 build 6 and rolis tool 1.8
After i upgrade my NK 3310 V4.35 to any version
I updated the FAID and do unlock the Sim lock using rolis tool 1.8
but still facing the same problem....

i can confirm not hardware problem because when i flash to the original software i get back 100% signal...

Is there any solution for this problem???

thank

NLOGOMASTER
17-04-2003, 08:24 PM
software has bad signature or wrong product code,
use another flsh file

Buer
18-04-2003, 11:00 AM
==<software has bad signature or wrong product code==>

i don't get the point...
i try many differrent flash but still cannot...except the original flash file only...