3210 contact service(what else)

[jim_pam]

I have a nokia 3210 with contact service on it.
What if any are the chance of get the phone up and running again.
I have nokia flasher leads and the M-BUS cable.
Thanks in advance.undefined

[real_enzo]

Try Contact Service repair
at www.mobile.box.sk (http://www.mobile.box.sk)

But with a MBUS cable u can´t do much
The prog should be for MBUS, try it!

greetingz
[enzo]

[spider-x]

if phone reset and display contact service then it flash it with mcu+ppm calc faid if you upgraded it or different ppm package if no reset just display contact service then its maybe the eeprom

[Kid]

try doing a full Flash (MCU+PPM+EEPROM) then calc FAID using EEPROMTOOLs Ver3.0. and it should be back to normal, if not, God bless, it could be a HW problem.

BR
Kid :smile:

[qtboy]

use eeprom tools and click on test. it should give you an idea of the cause of the problem (hardware or soft)

[tra0416]

use eeprom tools suggested by qtboy.
or use wintesla selftest.

if its software prob and cant repaired
by eeprom tools. You have to use
pony prog. 3210 has an external eeprom
and not emulated in the flash.

Insert sim and then contact sevice , is true
for 33xx, 62, 82 ..

[Zzzooommm]

3210 have a fisic eeprom, so it should be ok.
If your Contact Service is a software problem, just flash your Phone with a Flash (MCU+PPM) then calculate FAID.
If this don't fix the phone, try to open it and clean it very well with alcool.