Question for Abe or any other veteran

[robphp]

Hi Abe,
Please can you help?
I have downloaded the nok tool 17b which i believe is the correct program for the suspect versions eg; 3310 v 5.03 / 5.11 also 3330 v 4.30 / v 4.50 on a previous posting i saw that you can not use m/f bus cable which i have.someone then said try Abe's cable.Do i have to buy a new cable? if so which one?Also dose it have to be modified,as i am not as able as you.Any advice on this would be greatfully received.
Many thanks in advance.
Rob :???:

[Visar Mato]

Nokia tool Rolis 107 Work with mbus cable and with nk calc or eeprom tools b-phreak you can unlock any nokia
Regards
Visar ;-) ;-) ;-)

[DavieB]

Sorry Visar Mato, noktool and nk_calc only work with pure mbus cables (e.g. ones with a physical switch, not autoswitch ones unless they've been modified!)

@robphp:
You will be pleased to know, however, that EEPROM Tools (b-phreaks) works with any mbus, even autoswitchers.. Get it, and tutorials, at www.cellularbase.co.uk (http://www.cellularbase.co.uk)

B.r.

[Leandros]

@DavieB
nope, not with mine.
I use knok for such actions, works pretty fine with it and my autoswitched f-/m-bus cable.

regards,

Leandros

[Abe]

go to download section and find my cable.........

[Visar Mato]

Yes you'right,only nk calc has a problem with that but the others prog. works ok
Regards
Visar

[robphp]

Thanks for the great info; guys.
BUT is the knok the same as knok 95 & is the EEPROM TOOLS 3.0 the same as 3.1 if so on the 3.1 i can't find "clear splocks"any help would be great!
Many thanks.
Rob :grin:

[DavieB]

Lol leandros, your cable sounds realllllly bad! :smile:

www.peccomputers.co.uk (http://www.peccomputers.co.uk) sell autoswitchers that work with EEPROM Tools.

@Visar:
NokTools (Rolis) doesn't work with unmodified autoswitchers! Maybe your was modified before you got it, or is of a modified factory design but the program doesn't work with standard mbus autoswitchers!

[Visar Mato]

Yes all my cables are modified from a friend of mine in Greece.
Regards
Visar
;-)

[Zzzooommm]

All of my cables are "handmade" and all soft works 100%. Check your COM port settings.