Repair Gd67 100%

[kuka]

Hi,

First you must download Panasonic-gd67.

http://download.vilani.com/telefonos/panasonic/Panasonic-gd67.zip

-Rename gd67sp.spu to PA13.bin
-Run ghost3D and select GD30
-press partial flash and select PA13,press and hold power buton
-when is finished you will see on LCD test mode and disconect your phone,phone must be in test mode
-now rename PA13 to gd67sp.spu and run panasonic-gd67 and conect phone
-load gd67sp.spu and press flash
-after flashing press unlock
-now your phone is live







:D

[dead man inc]

Hi there,one question does this unlock as well????????????

ALL THE BEST!!!!!!!!!!!

=====DEAD MAN INC=====

;)

[kuka]

Hi,

Software is Ok.
I am repair my gd67 and unlock with this software.

[Jani-Jan]

hi dear kaku
our phone gd67 is dead with xak soft
doz it wort with dad fone?

[kuka]

Hi,

I am kill my gd67 with xak software.
Software is OK and work dead phone.I am repair my dead phone and now is work.First you must rename gd67sp.spu to PA13.bin and run ghost3d and select gd30,press partial flash and select PA13.bin and press power on and hold.When is flashing finished you will see on displey test mode.After this run panasonicv5 and rename PA13.bin to gd67sp.spu and flashing your phone.When is flashing over you must press unlock buton .

[L. Y. S. I...]

I kill my phone gd67 with gd67v1.0c. It was writing the flash included in the soft & at the and shows a message in the phone's screen(....CRC error_leave conected.....). I think the problem came that i start with not a full charged battery. The "beauty" is that it wan't start flashing any more. Any idea to help me with my fu..ing phone? PLEASE!!!

[kuka]

Hi,

You must have full batery.
Pinout for gd67:
1,5-short
7-rx
8-tx
14-gnd
Run ghost3d and ............
See my post

[L. Y. S. I...]

KUKA, you are the man that saved my money. You are great. I'm in debt with you. I'm not materialising the problem. Thank you again & again.

[Sam_digital]

Can someone put a link for ghost3d

Sam_digital

[Lucas]

You will find ghost at :

www.unlockeasy.com

[Sam_digital]

dude can find it , can u post the link to that file

Sam

[kuka]

Hello,

[gsmsalers]

Kuka
Does your solution can repair panasonic gd-67 killed by frre flash unlocker? If after removing after unsuccessfull flashing doesn't comminucate soft then still can repair by your solution?
Thanks for attention.

[kuka]

Hi,

solution is for gd67 killed with xak software.
This is one posible solution for repair your gd67.
With this software gd67 comunicate with your PC.

[aki nil]

thanks sire
now im asking if ican use this way to unlock my gd60 new version ???
cause your answer that this solution is for repaire daid gd60 by xak softe..
sorry for my bad english ..
thanks again :rolleyes: