PDA

View Full Version : Beta Testers Here.......


jonjocker
08-05-2003, 03:13 AM
mga bossing....

Virus??????????===NONE (NORTON2003)
RIGHT CLICK AND SAVE TARGET AS
www.jocker.netfirms.com/G3+4beta.zip

this is only a a part of my proggy...(function)
I need beta testers...I need comments....

feature :
add additional 4 frames for your slideshow
note:the file must be patched by G3nolite1.7
SANA GUMANA...........

ENJOY...

JONJOCKER
BOEBOE
08-05-2003, 05:17 AM
Patched a 5110 5.30 PPM B:

Did not work, used a unmodded flash, patched with Genolite, patched directly wit your patcher flashed to ur phone:

Phone restarted!
Here's the log file:

==>Slideshow table found at AC0F4
==>Slideshow table found at AC0F4
==>free spaces found more than 2500 bytes
==>new bitmaps
==>5th frame located at AC173
==>6th frame located at AC36B
==>7th frame located at AC563
==>8th frame located at AC75B
==>Wow I did it...
mabuhay ang TAP GSM PINOY
{Please use my SlidEdit 1.02..use manual search}
www.ed2k.com.ph--regards to all
jonjocker
08-05-2003, 06:49 AM
www.jocker.netfirms.com/G3+4.zip
www.jocker.netfirms.com/slids.zip
right click and save target as
try it again boss...Id fixed d bugs..

thanks.....We will make it perfect.


regards,
jonjocker
BOEBOE
08-05-2003, 05:23 PM
Working 50%!

The phone shows the first frames of the slideshow... (g3ggo's pic's's) Gsmfreeboard, presents, slideshowpatch, thx to Neks..., THX TO NEX...(AGAIN), First frame of your slide...shows only 20% of it.... crash.... phone restarts... . Updated FAID (Got network), Killed FAID, still, same problem....

Here's the Log:

==>Slideshow table found at AC0F4
==>free spaces found more than 2500 bytes
==>new bitmaps
==>5th frame located at AC170
==>6th frame located at AC368
==>7th frame located at AC560
==>8th frame located at AC758
==>Wow I did it...
mabuhay ang TAP GSM PINOY
{Please use my SlidEdit 1.02..use manual search}
www.ed2k.com.ph--regards to all

Good luck Jon...:(

PS. Nobody seems to be interested???!!
I think it's gonna be a great prog!!! Thank you!!
jonjocker
09-05-2003, 10:24 AM
search this with hexworkshop=F7FFFFD5 and change it with F7FFFFB5,,,
ThE phone will not be restarted...
please report the result to me....


thanks for the support......
jonjocker....
BOEBOE
09-05-2003, 05:39 PM
Can you be more specific? I've just found 7 of those...
g3gg0
09-05-2003, 07:47 PM
take the one at the addresses of the g3n0lite code
BOEBOE
09-05-2003, 07:56 PM
wich adress of Genolite didn' fint that F7 FF FF B5 thing in your code...
jonjocker
13-05-2003, 09:43 AM
Maybe this would be a better one,
Iv fixed the autoshut off and also the repeat showing of the 4th frame....


may u report again ur comments..

this is the file

right click and save target as

www.jocker.netfirms.com/slide+4.zip


regards....
BOEBOE
13-05-2003, 06:08 PM
Test Results Nokia 5110 PPM A

Patched with Genolite 1.7
Patched with G3+4.

Working 95%!

Slideshow worked 100% OK, but after the last frame, phone restarts...

Kill FAID and MCU, runned the slideshow twice, to make sure it wasn't FAID, bit still restart... Almost perfect!
Cyahus2K
13-05-2003, 10:26 PM
ok to ah thanx to jonjocker:) :) :)
blackmantra27
14-05-2003, 02:57 AM
@jon
thanx m8

@cyahus2k
Alive and kicki'n again but stil newbie. . . . hehehehe..
Cyahus2K
15-05-2003, 09:04 PM
yes boz its nice to be back here!!!:D :D :D
newcasper
15-05-2003, 11:12 PM
where are you jonjoker?
we are waiting for ur updates
jonjocker
16-05-2003, 06:44 AM
Maybe the cause of restarting is you missed to updateFaid....
but my experience is I had been tried it to my customers but there is no problem....Please use fresh file....

My co-forumers in TAP GSM PINOY were enjoying my soft....

http://www.jocker.netfirms.com/slide+4.zip





thanks
BOEBOE
16-05-2003, 08:33 PM
Originally posted by BOEBOE

Kill FAID and MCU, runned the slideshow twice, to make sure it wasn't FAID

Did it again, waited 10minutes, phone did not restart, after running the slideshow, it restarted... Sorry, no FAID problems...
kraze1984
17-05-2003, 12:51 PM
Will try it on my 3210
newcasper
26-06-2003, 04:13 AM
Originally posted by BOEBOE


Did it again, waited 10minutes, phone did not restart, after running the slideshow, it restarted... Sorry, no FAID problems...

the same here
I tried it on 6110 and 6150
no faid problems
but also restart after the last frame
alexmae
27-06-2003, 08:22 PM
Dear BOEBOE, how could you change your status like "Maker of the project"? plz tell me it!
BOEBOE
27-06-2003, 09:52 PM
Follow this link: http://nokiafree.org/forums/member.php?s=&action=editprofile

And go to "Custom User Text" -> Type in something and click on "Submit Modifications"