PDA

View Full Version : V66 , V60 , T280 , V70 , V66i , V60i , T280i , T720 , T720i , C330 , C331 , C332 free



wings
09-05-2003, 04:58 PM
VictorGSM v 3.2.3:
*Fast 20 seconds phone unlock
*Fast 20 seconds IMEI Changing (once phone is unlocked, you can change IMEI in 1 second.)
*Unlock browser and WAP Settings
*Repair "Contact Service Provider" message during fast unlock.
*Phone flexing (setup phone for different regions, activate / deactivate features)
*Upgrade / downgrade phone software
*Fast language pack only flashing
*Repair phones after free China Flash File (after repair you will be able to flash any european flash file or language pack into this phone)
*Full EEPROM Read / Write.
*Read / Write battery settings.
*Restore factory battery settings.
*Write display settings.
*Read / write wake-up graphics.
*Autoconnect for quantity flashing.
*Sound playback after flashing.
*Java uploader for Java enabled phones.
*Flashing via USB!

***Flashing:

V66 , V60 , T280 , V70 , V66i , V60i , T280i , T720 , T720i , C330 , C331 , C332 , C333, C350

***Fast 20 seconds unlocking:

V66, V66e , V60 , T280 , V70



Here (http://www.telempire.com/showthread.php?s=&threadid=1202)

BR

phantom2002
09-05-2003, 06:20 PM
download from here too (http://www.phantom.mirrorz.com)

Regards

wings
09-05-2003, 08:44 PM
What about Flash files .

BR

Scataface
09-05-2003, 10:18 PM
When I change the imei on v66 the leanguage pack,change?
If i have a phone that speack in italian leanguage,when i change the imei,this leanguage change?
Answer me please and thank you very much for you attention

MicrostarGSM
09-05-2003, 10:34 PM
How about the flash file???

Did PST flash file support with this software????

buddy
11-05-2003, 12:11 PM
Originally posted by wings
What about Flash files .

BR
wings??????
u dont have it????
how come????
ok contact me .

wings
11-05-2003, 12:27 PM
Originally posted by buddy

wings??????
u dont have it????
how come????
ok contact me .

bUDDY i was just asking him man if he can uoload so i go to the

beach today ...

But i have to upload cause he dosent have ..


BR

spectrum
11-05-2003, 01:36 PM
How can I get cable for C3xxx?
Or can some body tell me the pin outs
Thx

Mobile Lab
11-05-2003, 04:24 PM
which cable works ..

usb port or data cable???

Thanks n Regards

spectrum
11-05-2003, 05:02 PM
I have used Com Port cable for it and it worked for me

Karzyk
12-05-2003, 08:17 AM
can VictorGSM v 3.2.3: work on my i90c

Mobile Lab
12-05-2003, 08:18 AM
any one have flash files of these models..??

MicrostarGSM
12-05-2003, 10:07 AM
still in searching..........

Mobile Lab
12-05-2003, 05:44 PM
wings could u plz upload motorola flash files for us..

Thanks n Regards

jusluke
12-05-2003, 06:12 PM
thanks man now my problem is where to get the cables for these phones:D :D :D

Mobile Lab
12-05-2003, 08:10 PM
here is cable pinouts which works in victor software..

Thanks n Regards

cotton
15-05-2003, 04:11 PM
will it work with a USB cable?

MicrostarGSM
15-05-2003, 04:15 PM
yes you can use it with USB or COM cable

MicrostarGSM
15-05-2003, 04:21 PM
for USB

phantom2002
15-05-2003, 04:48 PM
@Microstar

check out the schematic for the serial cable on my website as its less expensive to build lol

www.phantom.mirrorz.com > Motorola Page Under Schematics & Hexes

Wbr

cotton
15-05-2003, 04:58 PM
I have an official motorola USB cable can I flash and unlock all the above phone without doing anything to it?

phantom2002
15-05-2003, 05:17 PM
its much easier with the serial cable as then you don't have to install USB drivers for it.

Regards

juanaldo250
27-05-2003, 01:12 AM
hello where can i get the flash files for change language in v60, this soft is very good can read security code in tdma and cdma phones its really great ,...................................


please put the flash files here.

best regards

bongie
29-05-2003, 03:45 AM
i tried it and installed everything. it can now read the phone but says it cannot unlock 8 mb phones like v60i. you said in the thread starter it can do v60i but how come it cannot? please correct me if im wrong or tell me steps or procedure if you know to make it work.thanks

Crux
11-08-2003, 12:21 PM
hi.

i need to unlock my 2 motorola c330.

can anyone help me?

what do i need?

can anyone post a code?

or can i unlock it whith usb cable?

ahib
11-08-2003, 04:28 PM
@crux YOU CAN UNLOCK VIA usb YOU NEED to go on www.spunlock.com download drivers & passo &the motoservice soft 999(heard this works-personally have'nt tried as I hav no fones 2test on)

djshadow7
12-08-2003, 10:47 PM
can i unlock my v66 remotely?
cheers

datalife2000
17-08-2003, 10:55 PM
have made my serial cable for v66. but it seems not to work because no codes detected or subsidy. "proggie says Phone not Found"

please assist