PDA

View Full Version : Dongle Terminator error 0101



Wu-Tao
14-05-2003, 11:28 AM
Hello, what means this error? ???, before mu functioned correctly.



Thanks and a greeting.

fhwong
14-05-2003, 01:22 PM
Hardware problem or connection

Wu-Tao
14-05-2003, 02:39 PM
Thanks, but the dongle recognizes it perfectly, if is problem of communication, how s epuede to resolve? ????

fhwong
14-05-2003, 03:23 PM
Hi, checking dongle PIC16F876 pin 11 to LPT pin 2 & Pin 13 to LPT pin 4, is 14.7456MHz using 27~33pF cap ? Error 0101 is Hardware problem, u need checking your hardware 100%.

http://www.telempire.com/showthread.php?threadid=1040

Wu-Tao
16-05-2003, 06:44 AM
Thanks by answering me, the connections I have them well facts just as you say, the quartz is of 14.7456, condensers of 33pF, all correct, but continues that error, I will have to revise it again, certainly can send me the pcb that have utilized you for the construction of you terminator??? to wu_tao@wanadoo.es



Many thanks and a greeting.

kevinn13
18-05-2003, 06:09 PM
0101 is phone not connected message

remove the connector and battery rejoin and then presss boot all and model. Then watch blue bar when its ready it will say error 0000 then just load up DIV.

Eurotronics
29-05-2003, 09:10 AM
The error 0101 sometimes comes when you try to unlock T65, T68 and T68i....on Terminator dongles, but donīt come on DIV dongles. - known failure on some phones.

Regards

Jesper

Wu-Tao
30-05-2003, 06:44 AM
Thanks, all is correct already, the problem was the transistor BD139, that did not function correctly. Now functions with the terminator, the cool and the div perfectly.



Many thanks for all and a greeting.