View Full Version : gd75 lock code , how do i fix this ?
Sam_digital
14-05-2003, 02:20 PM
Hi guys
i have a gd75 , how do i find the lock code ?
im getting a gd75 data cable ( i need this right)
and i need to find software to read this .
help would be appreciated if u guys could point me in the right direction , also if i should get a different cable ..
Sam
L. Y. S. I...
15-05-2003, 04:42 PM
use this tool m8.
Sam_digital
22-05-2003, 12:38 PM
Hi , I got a cable here for the gd88 its fits perfectly to com port and to phone , switched on the phone without sim card and selected model gd75 and selected get keycode , responded like could not get response from md
Like the cable is not talking to phone , i tried with sim and without sim?
is this the wrong cable ?
Sam
how can i fix this pls help would be appreciated
Sam_digital
23-05-2003, 06:54 AM
Iv just worked out there the same cable , does anyone know of some good software to try to get rid of the keylock .
Sam_digital
thanks
At least i need to communicate with the phone somehow to work out if this cable is working (gd75 phone gd88cable) .
L. Y. S. I...
24-05-2003, 11:00 AM
Phone must be off. You must have an unlock/flash cable. Start the prog. and click "power phone". Next step: press shortly power button on the phone & it will go in test mode. Riiiiight?! :)
Sam_digital
24-05-2003, 02:55 PM
Ahhh ic , so its not a data cable , its a special unlock/flash cable for panasonic ? ,
Where can i get one of these from ! , I thought i could use a normal data cable to read the keylock .
Sam_digital
L. Y. S. I...
26-05-2003, 11:03 AM
There are a bit expensive but working.
xcompatra
22-06-2003, 10:05 AM
i use cable from gd 92. is tsis the right cable or not?
killerbee27
27-06-2003, 01:50 PM
what web site can i download the m8? thanks!
L. Y. S. I...
27-06-2003, 05:26 PM
It's the right cable. Look in www.gengheraenga.net for cb 2000
regmwesiga
19-07-2003, 07:23 AM
gd75 Invalid Sim
Dear All,
I tested CB2000 and succeded tp read most of data including Phone Code, I use GD92/93 cable, The problem is I can't get Network Code.
I dowloaded Gold Tool 2.0 by Ghost, But I failed to register it. The Instruction show the registering code to 00000000 key 00000000 when I apply this code the Computer hang-up.
Any who can help on this, This file it seemed it is infected by virus HTML.Redlof.A.
Norton 2003 failed to remove it. Any body to help
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.