starttone

[z0z3ko_Ol]

Hey ppl,

Do you have the samsung or ericsson ringtones that i can use as starttone??
Btw, i have two tones that i can't use as starttone.In ppmedit, they sound good, but sound crappy when used as starttone. Can you try them plz...

Thx

[z0z3ko_Ol]

NokDok,

Do you know how to add starttone in a 3410??
I've been using eleoson's sectone, but i want to do it the hard way.
I know that are a lot threads about adding starttone to 3310, but the 3410 is kinda different.

Thx

[NokDoc]

Hi,

Tone start locations are definied in a table with records.

1st step is to find 'a' tone, no matter what tone.

Try this on a 3410-306 with hex '00A70C0B', which should lead U to location 0009FEA8.

Add 20.0000 hex to this location. (> 0029FEA8.)

Search '0029FEA8', the location from where that certain tone was called from.

This will lead U to the tone address table of all mcu tones. (> 000A0408.)

Now U can make a list of all the tones available, and find out which is Ur startup tone.

Tone Table at: 002A0408, Nr of Entries: 040, End: 002A0607
(01) 002A0408 0029FEA8 (len 004.) (tone 00A70C0B)
(02) 002A0410 0029FEAC (len 008.) (tone 0004FF0C0BC046C0)
(03) 002A0418 0029FEB4 (len 008.) (tone 0004FF3E0BC046C0)

If U want to have some other tone, U can adjust the address table to point to Ur new tone, which U place at some unused area somewhere.

I hope it was clear.

Good Luck

NokDoc

[z0z3ko_Ol]

k,
will give it a try today

[z0z3ko_Ol]

NokDok,

Here's the tone table for 3410 v5.06
I beleive the start tone is @ location 22 ( len 008 )
There are 4 addresses am unsure about. Have a look @ them.

Thx
p.s the tone table may be incorrect...


Updated tone table below

[z0z3ko_Ol]

Hmm, just discovered mcutools...:)
How does it add the startup tone??

[NokDoc]

Hi,

Very good job.

ps, I think those last 4 are tones too.

NokDoc

[z0z3ko_Ol]

Hmm,
I've screwed up on tone 20
Will update the txt file and reupload,
Yup the last 4 addresses are tones :)
Have added the starup tone @ end of mcu. Working fine so far.
Thx NokDok

[mexusbg]

How to add a start tone in 5510. NoKDoc pls help me do it. I have Starttone and MCU edit, but it doesn't work? How to do it?
Do you have any cool start up tones?

[z0z3ko_Ol]

Updated tone table for 3410 v5.06
All credits goes to NokDoc :)
Any errors, lemme know plz

[z0z3ko_Ol]

Originally posted by mexusbg
How to add a star tone in 5510. NoKDoc pls help me d it. I have Starttone and MCU edit, but it doesn't work? How to do it?
Do you have any cool start up tones?

use MCUTOOL
I believe some1 attached it, use search
make sure u remove all the 0A 01 and 0A FE...
If u want to do it the hard way, open the fls in a hex editor, and follow NokDoc's instructions...

[mexusbg]

What do you mean by: "make sure u remove all the 0A 01 and 0A FE...".

[z0z3ko_Ol]

Originally posted by mexusbg
What do you mean by: "make sure u remove all the 0A 01 and 0A FE...".

These HEX values are for vibration.
If u don't want vibration with ur startup tone, just remove every occurence of 0A1 and 0A FE

[mexusbg]

I fixed it. I forgot to turn on the Warning tones :)
Sorry!

[User32]

If u want to do it the hard way, open the fls in a hex editor, and follow NokDoc's instructions...
you don't have to do all this procedure. what i do is: just search for the starting hex string 0002FD51250B46C000, select 0x22 bytes and replace it with your custom tone.

Full default startup tone for ALL nokias:
0002FD51250B46C00001FFA70C0B46C0000997058B0595058D0593058F0591059105