Flashing step by step

[Visar Mato]

This is a manual for people that have killes phones or need to change language correct contact service and many problems{SW}

First of all you need a mcu ppm and a virgin eeprom of your phone
You can download it at www.gengheraenga.net {tested}

Open your flashing program that you prefer {Rollis,Nokiaflash tool
Dejan 1.00 and whatever can flash the files {I use Nokiaflashtool by Gsm brothers,Rollis 478 and when some programs say UNKNOWN FLASH ID i use Dejan 1.00.

Flash Mcu ppm from start adress 00200000
Than you need to flash a virgin eeprom
Remember The mcu ppm ee flash you can read it from a good working and high version from adress 00200000-00400000

Start Nk_calc (I use this,it is the best}and F1 F2 F3
Insert Sim card and wait a few seconds
The phone will restart and than register to the network

Remember to read old posts
You can learn too much from other people experiences
and you will not kill any phone.

THere are not Idiots or people that can't do these things
Are only people that don't know how to do it
And they need some respect
If someone can help them will feel good that he has made some good at people that he don't know they faces or voices but are at the same forum as you.
And keep up this forum,We don't want to be this forum like
Gsm city,Where people only want to sell or exchange things
THIS FORUM IS FOR HELPING PEOPLE.

Regards to all members of this forum

Visar Mato

[badger]

Thanks for taking the time to do that.

[sonicdeejay]

:smile: :smile: thanks alot,,

[sonicdeejay]

hello.,,,,before all the process,how can I back up all data of my hp,,in case,,somethin wrong,,can I retain back to my normal hp,,??thanks...:)

[Visar Mato]

Remember
At nokia phones we allways can fix whatever we do.
For backup your phone
Read full flash and save in a secure place.
With Rollis or Nokiaflashtool by Gsmbrothers
Regards
Visar
When you make a backup please make sure that the EEPROM contents is properly read. Also note that in
NHM5 ver 03.24 and 04.02 the PPM has different start address from the other versions of the same model
Model MCU start
address
MCU end
address
PPM start
address
PPM end
address
EEPROM
start address
EEPROM
end address
6250 - NHM-3 00200000 0052FFFF 00530000 0059FFFF 005A0000 005FFFFF
3310 - NHM-5 00200000 0032FFFF 00330000 003CFFFF 003D0000 003FFFFF
Ver. 04.02; 03.24 only 00200000 0031FFFF 00320000 003CFFFF 003D0000 003FFFFF
3330 - NHM-6 00200000 0048FFFF 00490000 0054FFFF 00550000 005FFFFF
5510 – NPM-5 00200000 0048FFFF 00490000 0054FFFF 00550000 005FFFFF
6210 - NPE-3 00200000 0051FFFF 00520000 0059FFFF 005A0000 005FFFFF
8890 - NSB-6 00200000 0033FFFF 00340000 003CFFFF 003D0000 003FFFFF
5110 - NSE-1 00200000 002AFFFF 002B0000 002FFFFF External
6110 - NSE-3 00200000 002BFFFF 002C0000 002FFFF External
7110 - NSE-5 00200000 0050FFFF 00510000 0058FFFF 00590000 005FFFFF
3210 - NSE-8/9 00200000 002EFFFF 002F0000 003FFFFF External
5130 - NSK-1 00200000 002BFFFF 002C0000 002FFFFF External
6130 - NSK-3 00200000 002CFFFF 002D0000 002FFFFF External
6150 - NSM-1 00200000 0035FFFF 00360000 003FFFFF External
8850 - NSM-2 00200000 0033FFFF 00340000 003CFFFF 003D0000 003FFFFF
8210 - NSM-3 00200000 0033FFFF 00340000 003CFFFF 003D0000 003FFFFF
8250 - NSM-3D 00200000 0033FFFF 00340000 003CFFFF 003D0000 003FFFFF
www.b-phreaks.co.uk

[badger]

I still can't get the phone to work!
I have flashed it all o.k. The phone boots up.
When I run Nk_calc, F1 works fine.
F2 gives the error :- File error: OPEN FILE ! => c:\imei.def
F3 gives the error :- File error: OPEN FILE ! => c:\sp.def

What the hell am I doing wrong?!?!?
Thanks for your help.

[Visar Mato]

Never seen it man
Try with eeprom tools 3.1
Regards
Visar

[Zzzooommm]

badger, you have to install NK_Calc in root (C:\)
That error appear because you probably have Nk_Calc noutra directoria!

[:: sunny ::]

faced same problem ...but easy to handle...

just copy following files from folder where you installed nk_calc and paste it on C:\

-imei.def
-sp.def

or install NK_ calc on C:\

thats it ..:D

br:
haf

[simple_rod]

what is the username and password of this site www.gengheraenga.net ?

[:: sunny ::]

just go and register there..
they will email you your username (inserted by you at the time of filling form ) and password (autogenerated).


thats it.,.

haf

[blue_fusion20]

hi. i'm a newbie re: these stuff. do i still need a flashing cable? or would a data cable be sufficient for fixing a contact service problem? (by the way, my phone's a 5210, if that makes any difference...)

[badger]

Thanks guys.

[badger]

Great! My 6210 is working fine now, thanks everyone.
I may have a little play about and modify the code at some time.
After modifying it which program is best to recalc the checksums etc?
When exactly would I need to load a virgin eeprom?
Thanks. (I am getting there......slowly) ;o)

[levartemit]

Thought I had lost 2 phones, but ur mention iof the update eeprom with virgin information got them both back for me, cheers mate, i owe ya a pint :D

[gatot]

hugh thanks for visar mato, i will try now to flash my 6150

[gatot]

please help, where can i download the rollis 478 or nokia flastool by gsm brothers? thanks