View Full Version : BANANNA PHONE - Nokia 8146
eden7650
30-05-2003, 09:26 AM
Can anyone unlock these phones? i have a datacable and a flasher cable but need "OLD" working software for it...
i dont know what network it was originally on as i bought it off ebay for £20
he said One to One but i dont know exactly
its a nokia 8146 (matrix/bananna phone)
Phone: NK 8146
IMEI: 495032201800460
Network: one2one
Yotamz
30-05-2003, 10:56 AM
these will be your codes if one2one provider code is 234-30
#pw+1657014099+1#
#pw+1657014099+2#
#pw+1657014099+3#
#pw+1657014099+4#
remember not to try more than 5 times if it's not the right code!
eden7650
30-05-2003, 11:11 AM
No luck
+1 said CODE ERROR
and the +2 to +4 just said "SAID CARD WAS NOT RESTRICTED" then put my o2 chip in and it says "INVALID SIM CARD" still...
any ideas????
maddog
30-05-2003, 11:19 AM
Its only a single band phone the 8146 (1800mhz) it was the 8110 that took the 900mhz! So basically it will only ever work on t-mob and orange (in the uk anyway)
eden7650
30-05-2003, 11:23 AM
still doesnt work on my orange card even with the codes given....
HELLLLLLLLLLLLLLLLLLLLLP! Its not blacklisted i know that as the phone was off a completed contract...
Yotamz
30-05-2003, 11:26 AM
i calculated the codes again. same results :(
eden7650
30-05-2003, 11:27 AM
thanks for trying...now im baffled......
what do i do? :confused:
eden7650
30-05-2003, 11:29 AM
if i got a datacable for it would that work?
what software would i use being as its an old phone?
Yotamz
31-05-2003, 10:56 PM
there must be a way of unlocking it with cable..
maybe you'll find something in this site (http://mobile.box.sk). there are many old programs there. from the dct2 age.. :)
DavieB
31-05-2003, 11:23 PM
Using the old DCT2 mastercode generator i got:
1982499873
Try entering that in the same way as the above ones.. Good luck :)
Regards,
Dave
eden7650
01-06-2003, 01:48 AM
#pw+1657014099+1# "CODE ERROR"
#pw+1657014099+2# "SIM WAS NOT RESTRICTED"
#pw+1657014099+3# "SIM WAS NOT RESTRICTED"
#pw+1657014099+4# "SIM WAS NOT RESTRICTED"
then tried
DAVIEB CODES
#pw+1982499873+1# "CODE ERROR"
#pw+1982499873+2# "SIM WAS NOT RESTRICTED"
#pw+1982499873+3# "SIM WAS NOT RESTRICTED"
#pw+1982499873+4# "SIM WAS NOT RESTRICTED"
still no luck.......
:( :( :( :( :( :( :( :(
my datacable came today...an MBUS cable not a flasher....
could this work if i had the program? any ideas what program would do it???
thanks all for your input so far but no luck et..... thanks :)
slikmik
01-06-2003, 08:08 PM
Mmmmmm.......
Well theres "New NokiaTool" which was designed to unlock the older dct2 i believe - worth a shot i guess :)
Have a search around dude
Sure you'll find it somewhere around
Good luck
Mike
nadger
01-06-2003, 08:25 PM
nokall should do it.
cprafferty
02-06-2003, 10:26 PM
Heres what I use.
BTW where did you get a 8110 MBUS cable I have bought a few and it says fbus/mbus on the pack. I try to use it, it doesn't work open it up what do I see FBUS only .I managed to get one but I now need a other one for the other shop.
mexusbg
03-06-2003, 09:35 PM
Why don't you resolder the cable to M Bus????
cprafferty
03-06-2003, 11:13 PM
@mexusbg
Great suggestion
BUT I don't have a soldering iron.
Also the diagram I found is COMPLETE gribbish to me.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.