Signal Light / Service Light

[red_life]

any 1 know how to make the SIGNAL LIGHT or SERVICE LIGHT???i already succesfull to modify the Service light for N3310...HAPPY~~~i already use 2 months to find it...

[red_life]

HAPPY~~~

[red_life]

VIew my NOKIA 3318 (modify)
please use nokia MULTI PLAYER to play it... coz this all use my N3650 to capture it..

THANKS~~~

[2100]

I have problem on viewing the file, Do u have the diagram on the wiring? could u please send to me the the diagram? my email address is [email protected]. Thanks In Advance.

[red_life]

go to my new web page
http://www.geocities.com/blue_life1111/1.html?1054315277003

[red_life]

can visit my new LAozzY WEB phttp://www.geocities.com/blue_life1111/1.html?1054315277003age..

[m1tch]

can you plz post details on how to do this? i want to put a signal light on my 3310

cheers

[2100]

that is wat i mean, :)

[red_life]

why no ppl reply????

[mach]

how do we do it,

[2100]

there's alot of ppl replying you, asking u how to do it! :)

[hanyean1]

just pull one wire from the positive of the buzzer and pull one wire from the beside of the pa (black transistor)!The positive of the buzzer connect to the positive of the led!

[2100]

There's a lot of trnasistor and resistor and conductor beside the pa , which one is the correct one?

[2100]

i already tested, but it won't blink

[hanyean1]

wait tonight i will post the diagram!

[phantom2002]

it will not blink until you use flashing LED !!! preset flashing tming but it would work 100%


lol

WBR

[2100]

@ phantom2002

it seems that u don't understand wat i'm posting. we r not tyalking flashing leds, we rf talking about blinking like a motorola phones or ericssons.. :(

[hanyean1]

Can anyone attach one 3310 pcb board picture with all the ic so that i can show u all how to do the signal light!I cannot find 3310 pcb board picture on the net!

[dannyogolo]

HELLO,
pLS can any1 use this attached pix to indicate where to wire for all to see?
Thanks in advance.

dannyogolo

[hanyean1]

hey the pcb cannot use lah because too much arrow!try two find the front and the back of the pcb and attach for me i will show the diagram!

[hooi76]

here is the real diagram

[wav]

how to connect? please teach how to do it .. very interesting !

[m1tch]

thankx for posting the diagram of the 3310 board. can the other guy plz show us how to do it now? u asked for a diagram, we got u 1, so cud u plz show us.

cheers

[hanyean1]

The diagram also cannot cause i need front and back that have colour one !

[hooi76]

you don't need wiring on the fromnt board for 3310. Please my friend

[wav]

come one my friend... you dont need the whole 3310 diagram, just show us a part which need to connect .... or else you need the full 3310 complete diagram for free here ?? haa haa !!

[danwood76]

He has already given the instuctions on this!
I will take a photo if you need it but I think his instructions were pretty clear, not very detailed but I understood!

[hooi76]

then could you kindly post a wiring circuit diagram for us? Which make the leds blink like Ericsson, Samsungs Motorola.....way when it got signal, it blinks, but if don't get the signal, it won't blinks. :)

[danwood76]

It is as described above with a small monostable timer circuit instead of it going straight to the LED!

If you know anything about electronics this should be simple for you!
If not, I am not going to bother explaining, it is simple!
I will post a schematic if you want one!

[m1tch]

where is it described above? if you could, plz post the picture of yours, or kindly xplain how its done. cheers

[GSM Super Star]

All we want is STEP-BY-STEP INSTRUCTIONS can anyone help?

[hooi76]

they are not as good as you who knows wiring stuff or electronics stuff as you,

THOSE PEOPLE OVER HERE FROM THER BEGINING ARE TRYING TO LOOK FOR A DIAGRAM WIRING AND AT THE FIRST THEY DIDN"T MENTION ABOUT MONOSTABLE WATEVER IC IT IS.

DO YOU UNDERSTAND ENGLSIH????

I ALREADY POSTED AND ASKED AND THESE PEOPLES REPLING JSUT A SIMPLE SIMPLE SIMPLE SIMPLE ...... BUT NO DETAILED EXPLAINATION ON HOW TO DO IT!!!


STOP FLOODING THIS TOPIC

[danwood76]

I haven't actually made it but if you like I will have a go!
I will do it over the weekend and then post results, a wiring diagram and photos!

What I meant originally was you could put a monostable timer circuit in there, basically what it is is two capacitors that charge and discharge at a constant rate, one charges, discharges and the other one charges up after, and LED is normally inserted and as a result of the constant charging and discharging it flashes!

I was thinking that you could use the above circuit instead of just wiring in a simple LED!
Also in addition to the LED circuit first described I would stick a 470 ohm resistor in between the positive from the ringer and LED to protect the circuit and phone!

The other option is to find an LED that automatically flashes as described above!
otherwise just use it non-flashing!

[Unique]

Buy a 3.5v flashing LED, (white is nicest) and wire it up.

The LED's arent hard to find, you can even get 0805 or 0603 flashing LED's, but they are quite hard to find.

Try maplin, farnell or RS.

If you dont understand any of this thread, dont make it.

John

[hanyean1]

Here is the diagram

[hooi76]

Tested, the led Keeps light ON with intermittant/blink light, still not that perfect....Any others who would lllike to contribute? I be the tester

And sadly, it blinks without a sim card too :(

[hanyean1]

if u dunno please no need to do!!!This signal light if u didnt put sim card also will blink one!!I already test it and it is 100% working!

[red_life]

excellent..so clever...now u all know the diagram already..no need my real DIAGRAM ...ok?thanks for hanyean teacher..THANKS THANKS THANKS...THANK QQQQQ

[obeids]

Come on guys

Do it the real way. Tell us what must we do and what stuff do we require. Exactly where to connect it and how. Dont be cowards. Share your stuff. Otherwise this shouldn't be on a forum. If we want to keep our stuff secrets then i suggest we rather call this forum "Undisclosed secrets". A forum where we tell people what we got but dont tell them how to do it.(Like small children do!).
Lets be big real people.
Share the stuff and everyone will share their stuff or this place will become like hell.

I dont think its very difficult to explain where the transistor is.
a little directions can help alot. And since u took a picture of it why dont u take a picture of it from inside???

Im very sorry if anybody fells bad but this behaviour of guys is absolutely crazy!! selfish selfish selfish. (rather go and sell fish!!!)

[pico]

did you read this phukin topic?
read again..


A forum where we tell people what we got but dont tell them how to do it.(Like small children do!).


a forum where "little" children" want all for nothing. read, experiment, learn.

[danwood76]

There are two different types of N3310 boards, one has the transistor there and the other has it in another place!
I don't know where but if you look at the schematics and match it up with the phone you should be able to find it!

[pico]

transistors... ??

if you want led on when you have reception, do as in ORIGINAL POST
connect cathode LED to Power AMP
connect anode to some ground point (first post uses buzzer)

now when power amp is active, you will get LED on. other times off.

of course if you connect led to component which is always in use (ie most other components on board), the led will always be on.
as for blinking in no signal state, other phones have that led controled by MCU.
want to add PIC inside then go for it!

[hooi76]

i think pico and danwood76 solution is the best, i will try again and let u guys know...

[wav]

please send the feedback, whether it work or not...and
if it work in 8250 or 8310 then will be good.

[wav]

Regarding your matter "flashing LED" .. it is work in 8250 or 8310 ??

[hooi76]

Why don't u ask your self too to be a tester?

As i mentioned earlier in the post, i already test it and the point that i metioned is not wat the solution they given (they are not giving the correct thing of wat i'm looking for) , the light ON 24 hours a day with intermittant lights, without a simcard too.. no point modding that using that solution they posted. wasting time...

They don't understand wat i mean, (Like Ericsson, Motorola, Samsungs) do they blink although they don't have signals in that area or without a simcard?

Thanks for the sharing too....

Becarefull not to short circuit, i lost one lithium battery. Although it's cheap, but it's worth a try.....

Attach this is a new picture with a newer board version, so there's is a different from the schematic picture that i posted for solutions/help. (Why don't u people test yourself? SHIT!!! Keep asking , keep asking Afraid of wat? Afraid of loosing a battery?), i personally tried each point myself, but failed to get wat i want(That's y i'm looking for other's idea) . only light ON 24 hours a day with intermittant lights, without a simcard

[luN]

i got it blink.... but even i off my handset, the light still on with 20% of brightness. when it blinks, it's quite special, coz it looks like fading and blinks slowly...
can anyone tell me how to make it just blink and when i turn off my handset, it off too?
thanks....

[hooi76]

Any new diagram to to this service light or signal light ?