PDA

View Full Version : C45 Alive again!!!



eB
20-05-2002, 04:53 PM
My C45 is alive again... It wouldn't turn on. First I upgraded the sw version to 31 - fixed the "buzz" problem (that was caused by the downgrading), but appeard the "beep and light flash" again - , and then with the map file that Zzzooommm sent me I was able to fix and unlock the phone.

Thanx to Zzzooommm and all u guys 2

:: sunny ::
20-05-2002, 05:35 PM
which tool did you used for upgrading C45 software ?

eB
21-05-2002, 11:44 AM
Used upgrade files for winswup. U can find them on Landy's Homepage.

Kid
06-06-2002, 08:56 PM
HI, I have a C45, "WRONG SOFTWARE".
What should I do to repair it?
Can someone teach me?
I never flash Siemens before.

Reason for wrong SW is because I try to unlock it and it became like this.

Please tell me in detail if possible, thanks.

eB
06-06-2002, 11:47 PM
U will need to ask someone to create a repair map 4 your phone. Try to talk with Zzzooommm. He created the map 4 my phone for only €10.

eB
06-06-2002, 11:56 PM
@Kid
Siemens ´r a little different from nokia. U can upgrade/downgrade phone using only a flash file (normally winswup's files). Don't need to calculate checksums or faid.
But if u "damage" phone's sw u must make a repair map 4 the phone. 4 unlock the phone (C45) u must have a map also. This map is created based on type of phone, an ID that is unique to the phone, and also based on IMEI. This stuff must be read from the phone with a logger.

Zzzooommm
07-06-2002, 10:44 PM
Kid, just make a log of your phone and send it to me. I'm offering one Map to each member of the forum until 15th July.
;)

DavieB
07-06-2002, 11:02 PM
@Zzzooommm:
I dont have any that need done but THANKS! We need people like you showing a bit of generosity every now and again :)

Thanks :)

XARiUS
08-06-2002, 02:15 AM
Hi! I'm also new to Siemens... Just want to ask...
If we make a full backup from a C45 and if something goes wrong we can always restore the software from the backup, os it isnt like this???
What precautions we need to have to have a garantee that even if i flashed it with wrong soft, i could repair it WITHOUT using maps?

Tnx

Kid
08-06-2002, 03:10 PM
@Zzzooommm,
I can't get my log, dunno if it's my SW not working or it's because of the Wrong SW and it can't read it.
Can you send me a SW to read Logs? Maybe you can upload it to my yahoo group. Pleaseee.... thanks.:(

Kid
08-06-2002, 04:04 PM
@Zzzooommm,
Ok, I found a logger, not sure if it should be like this, cause the imei was ask to be fill in by myself.

[Model: Siemens S45][PhoneID: 5EED0513][Desired IMEI: 350173-70-305539]

And how should I use the map?

Can you please teach me, I'm totally new to siemens. thanks.

Zzzooommm
08-06-2002, 04:52 PM
Here is the software you all need to read log's and write the Map files: Siemens Logger (http://planeta.clix.pt/scarab/logger.zip)

To read the log and write the Map file, you will need Siemens Logger 3.0
Here is the process:

1- Unzip Siemens Logger
2- Connect the phone (turned off) to a Mbus cable connected to PC
3- Open the program Siemens Logger and click on Logger section.
4- Select the correct model of your Siemens
5- Click the button (Read Phone) and "scanning" will appear in the program. Now, just click once in your Power Button and the program will start reading the phone.
6- The Siemens Logger will ask you the NEW IMEI. Unpluged the battery phone and copy the IMEI of your phone (copy from left to right. There are no space to insert the last IMEI digit)
7- Click on button "Save Log"
8- Send this log to me ([email protected])

:D

Kid, send me a e-mail and i will reply it with the Map file you need!

Zzzooommm
09-06-2002, 02:30 AM
check this topic:

Reparing and Unlocking all Siemens (http://nokiafree.org/forums/showthread.php?s=&postid=11378#post11378)

Zzzooommm
09-06-2002, 02:35 AM
Eriko, check this topic:

Reparing and Unlocking all Siemens (http://nokiafree.org/forums/showthread.php?s=&postid=11378#post11378)