8250 partial flash address

[wai3000]

could someone tell me the srat and end address for an 8250 PPM and MCU file, the reason is because i edited the full flash file and i think i have messed up the eeprom and it shows "contact service" at random times

i have tryed flashing my modified flash file then the 8250 virgin eeprom with no success.

i have also use eepromtools with no success as well. i would really like to fix this problem as it always shows contract service at the most unappropraite times!

[sergo_zmeia]

Hi!
MCU start address:0x200000
PPM start address:0x340000
Eeprom:0x3D0000
Regards!
Sergo_Zmeia

[wai3000]

so in rolis 4.78 i would put 0x200000 as start address
and 0x3D0000 as end address?
would this be correct??

[wai3000]

any help please???

[pico]

start address always= 0x00200000
no need to enter end address...

[Alinus]

Moved from Nokia general disscution forum.

[wai3000]

0x00200000
i want to just backup my MCU and PPM with Rolis 4.78
without my eeprom


so just backup from 0x00200000?

[wai3000]

can anyone help please?? my eeprom keeps getting corupted when i edit the flash file so i want to just have a flash file containing MCU + PPM

[sergo_zmeia]

I dont know about rolis flasher cause i dont use this soft...but with Knok You can exactli write the address for start and the end of the file...
Good luck!
Regards!
Sergo_Zmeia

[wwanthony]

You can use Knok and read the MCU and save as fls, then do the same with PPM. (they are saved to Knok root folder)

Load them both with Rolis, click the arrow pointing up then save as 8250mcu_ppm.fls or whatever.

[wai3000]

knok doesn't work with 8250!
anymore ideas on this please??

[wwanthony]

To stop your flash from getting corrupt you may as well get the latest version and start from scratch.

Get it from here:
http://www.gsm-funworld.de/nokia/8250.html

[wai3000]

i am using a new clean flash,
i have upgraded the phone from an 8210 to an 8250
so i am using that flash file.

[wwanthony]

I have also upgraded an 8210 to 8250.

Read my post in this thread to get a fully working version:
http://nokiafree.org/forums/t34199/sd10a2220723a54e9a3037568603b5c32.html

If that doesnt work you must have a hardware fault.

[wai3000]

oh yeah this idea works! didn't use 6.04 though because i like to put a password on my messages

thanks!

[wwanthony]

Hi,
What software do you use to put a messages sec code???
I've wanted to do this for ages but gnolite cant read the flash.

Which version firmware do you use aswell?

[wai3000]

i read in one of your replys that you are using 8250 version 6.04 and sectone didn't wor
i haven't tryed but i assume you were right
i use the attached version to add password on messages menu.

[wwanthony]

Huh? thats the software i've had for ages.

Where do you read the flash file address's?
With gnolite?
I have tried to real lots of versions of 8250 with it but it doesnt find all the menus, so I dont know what to input into the sec code program.

Which 8250 firmware do you use?

[wai3000]

in genolite 1.7
chose "menu structure"
tick "menu structure"
type "ENGL" in Language box
and click read.

copy and paste the line which reads messages and security menu

is this what you are stuggling on?

[wwanthony]

Hi Wai,
Thanks for the info about gnolite :)
Can read the menu structure now (with the description next to it), but cant get it to put the sec code on messages??
I'll get it to work though with a bit of messing around.

Hey Knok build 1 works fine with 8250.
I'm not sure about other versions but would have thought they will work with it too.