PDA

View Full Version : 6210 does not respond "POWER ON"



smackabit
23-05-2002, 05:38 PM
Hi guys.....here you have an another one..
I have FuCkEd up my phone (i think).
1: I flashed my 6210 but..somthing went wrong!!!
2: Tried to flash backup back into 6120...well as you mighthave figured out, I could`nt make the phone to respond when pressing "on" button.
3: What do i do?? all flasher progs. ask`s you to "press power on" ....I am doing that but nothing happens..
4: are the flasher progs. you don`t have to press "on" to flash??

Please help...

(I really love my phone) :(

MUF
24-05-2002, 12:00 AM
I suppose you already tried to remove battery?

deajam
04-06-2002, 09:59 PM
i also had problems flashing my phone. It wont turn on so i cannot flash it again. The phone is currently dead. Please help.

Osman
04-06-2002, 10:13 PM
u must download DarkShell 3.01and nk_calc
flash your phone mcu+ppm flash
whlile done
run nk_calc
repaired
;)

deajam
04-06-2002, 10:31 PM
thank you for your reply but im having trouble locating darkshell and nk_calc. any locations?

Osman
05-06-2002, 12:44 AM
ý go to sending dark now
1 - if no run dark shell flash
2 - run msdos Flasher.om
3 - F2
Enter
Enter Adress Full

Big Ted
05-06-2002, 09:55 PM
I used a program called rolis ver 4.78 to flash the phone, excellent program for dead phones, load up your flash, flash from 0020000 (usually).
to do this insert paper between the phone and the battery connections just enough to cover the connection and some sticking out the top of the phone. when asked to switch the phone on pull the paper up while keeping the power button pressed and as if by magic it writes the flash to the dead phone.

worked for me on 2 different occations

Cheers + Beers

Ted.