dct4 calculator dongle

[jak2812]

hi, i have the scheme for make one dongle for the dct4 calculator, this circuit have one AT89C4051 ic.
i need to know the program that i must use to program the ic, because i have seen in icprog and ponyprog but no support this ic.
can somebody helps me?, thanks

[kornel]

yep i've got file that seems to be exactly what are You looking for
i've not tested it works

maybe someone have

cheers

[jak2812]

well kornel, i have the hex for the ic, i need the program to put the hex in the ic.
if you have it send me to me, thanks

[kornel]

oh so i dont understand, i've the hex too
program ?? to put this hex to ic ? it's obvious You need some hardware programmer depends what kind i'ts, You will need maybe some software too.
but hardware i think is needed or You can maybe search some store where people can program the ic. it's should be cheap

but do You know in ex. 3dSMAX some versions use dongle too
and it's hacked by software that emulate the dongle, so why dct4 calculator don't have such crack ? i realy don't know

cheers
sorry for my post

[kornel]

so i loked for some stuff here i can found people that have that chip programed for dct4 calc for nokia it's cost about 20euro :(

[Unique]

Guys... I'f you want it that bad just buy one (http://nokiafree.org/forums/showthread.php?s=&threadid=28832). That one is only $20 and its already made.

John

[jak2812]

friends., the problem is not the money, i can buy the calculator, complete with dongle not very expensive.
but here what i want to do is to make the dongle, i have the hex, i have the scheme, i have diferent programers, what i need is a program to program the avr ic
ok?, thanks

[kornel]

ok maybe try to give us name of hardware programer
i saw some software but for special programmer

maybe for Yours is some soft too
just give the name...

other way is to buy already programmed chip
cheers

[jak2812]

kornel

i have one hw programer, the name is "apollo III", it takes diferent sockets for diferent ic, it takes one card socket, one socket with 40 pins, one with 20 pins and one with 8 pins, but i don't know if works with this ic, i must test it.
in the other size, i'm waiting for the answer about a very easy hw programer to make, when i know something, if you are interesting in it , i'll give you the information.
about the sw to program, is posible to do with icprog or another type of program ( i have another one)

[luises]

Can you send me that hex, because I have one but not work!
Maybe your hex wrong too!
Working hex not free on the net.

Thanks a lot

Br Luises ([email protected])

[jak2812]

luises

i have sent you the hex, test it and tell me the result

[phantom2002]

hi i have programmer chip etc here waiting for hex file

if you want me to test it mail to [email protected]


WBR

[7210]

guys I have made my project now but I guess i have the wrong hex data for the dongle so everytime I calculate the code is giving me a wrong code. so any body has a real hex for dongle calculator? can u please share it. thanks...

[jak2812]

hi, boys i'll send to you the hex for testing, tell me if it works

7210 give me your e-mail and i'll send to you

phantom2002 i'll send to you

[luises]

This hex not work!
If anybody have another one pls send me or put it on this thread!
See this link:Unique (http://uniquephones.com/forums/showthread.php?s=&threadid=167)

Best Regards

Luises ([email protected])

[phantom2002]

which schematic for this ? same as dct4 unlocker dongle ?

Regards

[luises]

Yes? the same!

BR

Luises

[phantom2002]

this hex is the same as the jic unlocker dongle hex

Check the checksums !!! the both are the same (identical)


Nice try though

Regards

[Unique]

I have a few coded atmel's if you want.

John

[phantom2002]

i already have a dct4 calc dongle !!! i was only trying to help these guys test their hexes lol

@unique
can i have one for free to play with ?
My dongle is version 1, but you know that means bugger all cos the software sortz it out :)