PDA

View Full Version : 3310 wont unlock



coolnicks
28-05-2002, 10:24 PM
i have just flashed a 3310 V 04.24 and it now wont unlock ive tried using every program etc, any ideas? should i try and re flash it?



Nick:confused:

duron850ph
29-05-2002, 09:25 AM
use xpmobilepro, select RESET SP LOCKS or just use EEprom tools.

wfc
29-05-2002, 10:07 AM
try eeprom tools v3 with an mbus data cable
or try flashing a partial flash file with rolis
or mbus with knok v22

nokia6210e_0527
29-05-2002, 10:32 AM
don't bother with these 64kb flash files, use an mbus (com port) cable along with the 3310 extension and unlock the phone using eeprom tools v 3.1 by B-Phreaks (just click on the lock icon in the program)

Only flash files to the phone if you want to update the firmware/convert a 6210-6250, 3310-3315, 8210-8250 etc.

coolnicks
29-05-2002, 12:43 PM
ive tried all of that already, any ideas? none of the programs can change any of the locks!!!

help


Nick

nokia6210e_0527
29-05-2002, 02:31 PM
ok, make a backup of the phone (00200000 - 00400000) then download a full flash of a different firmware version (MCU, PPM + EEPROM) Flash that to the phone, then open nokia tool 1.8 by rolis or EEPROM tools, and update the FAID, Reset the SP Locks, And Recalculate your imei. Thats all you gotta do. Your phone should now be unlocked. If anything goes wrong flash the backup to the phone.

coolnicks
29-05-2002, 09:49 PM
ok, some how i got it unlocked, think by changing the locks to factory instead of user, now it will accept my SIM but have no signal/wont connect 2 network then after like 20 seconds it restarts and says "sim card not accepted" if u turn it bak off and on again it repeats this process.


Nick

p.s i got some flash files but not sure if they contain everthing, have you got an address to a flash that will defently work?:confused:

nokia6210e_0527
30-05-2002, 09:26 AM
ok, if after 20 seconds the phone resets, you need to update the FAID.

Full flashes, try http://www.flashes.online.pt/

coolnicks
30-05-2002, 01:08 PM
ive already downloaded the flash from that site, but the files are .c and .mcu i think not .fls and the rolis flasher wont open them! ive tried updating the FAID loads of times, will that be the cause of no network as well?

cheers!

Nick

nokia6210e_0527
31-05-2002, 02:33 PM
Try changing them to .fls and see if they work, I don't use Rolis I use Nokia Flash tool from the d/l section of this site. Flash the mcu + ppm + epprom (full flash) to 00200000 then open nokia tool V 1.8 and update faid, calc sp locks and update imei.