Flashing 5210 Problem - PLS HELP!

[spectrum]

I tried to flash Nokia 5210 with Knok-Phoenix, I chose 5210, the prog can not prepare the phone.
This what it says:

FLS1_ConfigurateBootstrapDCT3 : checksum is 4A8B
FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
FLS1_GeneralSendBootstrapDCT3 : bootstrap seems to be running
FLS1_PreparePhone : invalid NMP returned in phone RAM
FLS1_PreparePhone : detected NMP is NSM-5
FLS1_GeneralSendAlgoCodeDCT3 : checksum is 59D6
FLS1_GeneralSendAlgoCodeDCT3 : algo code seems to be running
CMD_handlecommands : cannot analyze phone

Looks like it is detecting 8850 instead of 5210
Pls how can I successfully flash this phone?
Thx

[Romeo26222]

thats the way on how to use rolis to flash 5210 works 100%

download rolis 4.79
be sure you kill the faid check before flashing
in rolis selecy file>>open>>select your fls file
then press on the down arrow"copy ppm buffer to binary"
if you want to overwrite the mcu even the SW is the same"for modded files" activate this option in the program settings
Now the flash button will be active press on it and start flashing your fone
it works with me 100% without any problems but make the delay index set to 2 or 3
I hope that helps

[spectrum]

Pls where do I "Kill the Faid Check" ? On the program
Thx

[Romeo26222]

Use g3n0lite to kill MCU+FAID checks

[p.barker.3646]

i have had the same problem!!!

knock says cannot prepare phone and so i tried the newest version of rolis and it erases the flash then says flash erase check error. now im stuck with a 5210 that has a blank flash!!!!

btw i tried your flash file romeo before and it is very good!!!!
i was writing a flash that i had made when i had the problems. nothing wrong with your flash!!!!!

[spectrum]

I used Griffin to solve my problem

[Romeo26222]

I never faced a problem flashing the 5210 using Rolis but by using my way"copy ppm buffer" and using ver 4.79..
I never use knok..it is toooooo slow..