Nokia 3310 die

[kushnarenk]

After flash my Nokia to 5.47 it works normal. But i used something with MBUS and she dead. I have no flashing cable. Can i kill my Nokia only with MBUS? How can i repair she? I already used all soft faid, sp, imei calculation.

[Mulder3]

the progam that you use is fake, there is no mbus flashing programs, try make full factory reset with eeprom tool or buy a flasher cable.

[kushnarenk]

I try all functions in all programs fm download section. I want make my nokia feeling well without flash cable.

[sysop104]

U can probably avoid flashing. Try using eeprom tools 1.3 from the dl section and click all functions. If that doesnt do the trick then yes u need to flash.

Good luck,

[cassidy]

Originally posted by kushnarenk
After flash my Nokia to 5.47 it works normal. But i used something with MBUS and she dead. I have no flashing cable. Can i kill my Nokia only with MBUS? How can i repair she? I already used all soft faid, sp, imei calculation.

How did you flash your Nokia without a flasher cable??!?

[xeros]

Try reset phone with: Eeprom Tools 3.1, Knok22 or Nokia Tool by Rolis/Jordik. If that won't help You should use Flasher cable to flash the phone.

Regards...

[kushnarenk]

I don't flash my Nokia. It's make another man. After that phone good work, but i used something with MBUS cable and it's died.

[mycomms]

Hi...i dun seems to understand u....but i am wondering how did u flash ya nokia using a MBUS cable ??? i only believe that pure mbus cable can open sp locks....but not flashing.....:D :D

[:: sunny ::]

to kushnarenk:

which software you used with MBus ?
wots probelm with it now ... does it show any thing or its dead ?

haf

[kushnarenk]

i don't remember wich soft i used for phone. It may be: pclocals, eeprom tools, knok, noktool by rolis, nk_calc...
Simpthoms:
Phone is on. It's find operator, but no signal. After 10 secs operator is absent. Key beep is absent too. After 20 secs phone restart...

[km20081985]

have you tried to use knok again to reset the user interface? or to do a full factory reset? i had that problem when i flashed the 3315 file to my 3310 it worked after using knok, hope it may be sum use to you.

[kushnarenk]

I right now used knok with full factory reset and ui reset...
Not work.
I repeat - i used all tools and all functions in each tool...

[kushnarenk]

May be all this tools not correctly work with v5.47?

[xeros]

That tools are working good.
I suppose you have destroyed yours flash with PC Locals.
If you don't know what did you do, you should reflash the phone with full flash (MCU+PPM+eeprom).

[km20081985]

i dont really know what else you could do then, other than keep trying all the programs you can find, or going and buying a flasher cable and just re-flashing ur phone or upgrading it, do you know if the IMEI number has changed? try playing around with that posibaly? i dont know if it will work.

[xeros]

The simptoms are telling, that the one or more checksums in the flash are not the same as calculated (that could be other checksums than Faid - MCU, PPM, eeprom...).