dct-3 unlocking codes?

[fgl30]

Is possible to unlock dct-3 with keypad codes like in dct-4?

[Dinger3410]

it ios possible, but the codes are not widely available like dct-4 codes.

it is only the network operators thet have the program needed to calculate the dct-3 codes.

Dinger :)

[bobl]

it is only the network operators thet have the program needed to calculate the dct-3 codes.

And nokia themselves of course...:D

Cheers

Bob

[n00bs]

I apologize in advance for being a complete n00b (hence the nick) though I'm hoping that you can help me with this one...
I have a Nokia 2100 phone (a DCT3 phone according to my research) which is SP-locked and I'd like to unlock it via keypress. So my questions are (1) is it possible to unlock my phone via keypress without use of any cables/dongles/whatever and (2) can I get a hold of the softwares needed for such without buying, in short, by downloading something over the internet?
If what I'm asking is illegal, then I apologize in advance.
Thanks and have a nice day!

[bobl]

If indeed the 2100 is a dct3 phone, then you cannot unlock the phone without cables etc, unless you get this from your network who will probably charge you for it. It may even be cheaper to buy the code as opposed to the cable, I don't know, research it! :)

Cheers

Bob

[n00bs]

I can get this phone unlocked here really cheap (~$4), I'm just afraid that it might get screwed up unlocking it by cable. And I'm just trying to look at all available options here.
I dig up a little further and I found out that there is no DCT-3 code generator that has been released. SO bye bye unlock via keypress.
Thanks for the reply!

[n00bs]

I just had my phone unlocked for $2 (very good deal if you ask me!) Just letting you know guys...
Thanks for all the help :D

[bobl]

Cool, glad you got it sorted.

It's too expensive to unlock phones in my area, it's cheaper to buy or build the cable and DIY.

Cheers

Bob

[xavierbegasse]

hi

I have the same problem here with my 2100 , it 's locked ( displays : "invalid simcard") .

Is it the same pinout as the 8210 ? it looks so.

If so , wich programm to use ? many programs on the net are bad, it doesn't recognize the phone " phone not connected" .

[Alinus]

use 8210 cable - is same for 2100

use nokia tools 1.8

cable must be in mbus mode.

press read info, and asfter SP option.

[NokiaFX]

I thought the 2100 was DCT2 though??? I dont think ive ever seen one...

[xavierbegasse]

that s what i did ! using the 8210 cable with nokiatool18 .
It went perfectly. It looks like a great soft, Does it work with a lot of nokia phones ?

Thanks for your help , my friend s going to be glad with his locked phone unlocked

[Alinus]

it works for all dct 3 phones.

wich are those? search the forum for the info

[SmOg]

NokiaFX: 2110-> Dct2
2100-> Dct3