heeeeellllpppp!

[natnat]

i tried to change the LED's of my 3210 but after i did it, my phone doesn't power up anymore. if you press the power on button, the leds flash for about a second then it goes off! and then the power on button does not respond if you press it. you need to uplug the battery before the power on button responds again. but then again the LED's light for about a second then the phone is agian dead!

what seems to cause the problem? did i burn out any parts of my phone since ive been replacing LED's i think 10 times!

[chunkhead]

Your led's have given solder connections to other parts of the PCB! Remove ALL of the Led's, check all connections to make sure they are not shorting, then start again! Refer to this post:

http://nokiafree.org/forums/showthread.php?s=&threadid=15296&highlight=leds+changing


;) :D

[natnat]

check the connections and a solder shorted out one a part of the circuit. i used the solder with a somewhat paste inside and it bursts a lot causing some solder to splatter on the side.