!!! Free Total Tool HEX and Schematic !!!

[DavorCroat]

Here is attached Total Tool Schematic and HEX file.

Work with Total Tool v1.60 and v1.90

All files (HEX, Schematic and Software) also can be downloaded from:

http://www.totaltool.netfirms.com


Enjoy it ;)


Davor

[Salami1_1]

I doubt if it will work..
I have 2 orignal hexes that work 100% (both tested by us and friends)
first one is the original for TOtal Tool 1.6
second one is altered little bit to also work with smartericsson some software versions and also with new software that supports T610.

This one differs A LOT from the second one so it will not work with the better/newer software
and differs a little with the original Total Tool 1.6 so I'm sure if it will work.

But you can try of course if you want;)

WBR

Salami1_1

[satcom]

Plz post your working HEX file,
THanku

[hergsm]

Hi

I test dongle today .....Soft CAN detect dongle with Sn 20030114
but NOT tested with phone because I dont have correct CABLE schema dongle to phone.......

dongle test with V155,160 & 190 all soft can detect.


**If someone have cable schema for Total Tool, post it here.

BR

[Salami1_1]

Originally posted by satcom
Plz post your working HEX file,
THanku

hehe good one...
of course NOT
Genuine things and products are only for sale or exchange.

@hergsm
THen you are one of few... most people I hear/speak can't get it get to work.

WBR

[hergsm]

Hi....

I down hex and schema link from DavorCroat......
I make my self dongle look like the schema with PIC 16F876-20,XTAL 14,7 & MC14053 and power from USB OS 98SE INTEL PIII 733 asus ........I upload hex to pic with HiLo programer ......

I try with SOFT TT 155
I test with T65 readed code phone steel OK....after that I try Flash AVR & ARM phone firm change and stell OK......Tomorrow I test with other Phone.

thank for link DavorCroat

BR

[sagarka]

hi dear did n e body also check it
if work then plz post
and salami if u have the scheme and hex then go 2 sales section and start yours shop this post for helping people so if u dont like to share yours hex and scheme then plz dont told about !!!!!!!!!!

[Salami1_1]

It was not a sales post mister...
I said I compared them with the hex I have (which I'm 100% sure of they are genuine) and they do not match..
(there is just a slight difference)
But reading hergsm his post it seems this hex also does work...

and what's your post about?! can't you read.. hergsm says he tested it and it worked.. why asking for people to post if they tested it... test yourself if you want it..

think before you post.

WBR

[DCT4]

What is IO HCF4053, it is correct name? Exist some alternative? Thx2All.

DCT4.

[phantom2002]

can someone post the cable schematics please

thanks

[DavorCroat]

Originally posted by phantom2002
can someone post the cable schematics please

thanks

Here is attached Cable Schematic too ;)

@ Salami: there is NO any other HEX file (except the ones intentionaly 'edited-damaged' by you and other people who have stock of Total Tool dongles for sale).

Davor

[DavorCroat]

Originally posted by phantom2002
can someone post the cable schematics please

thanks

Here is attached Cable Schematics.

DAVOR

[Angelo]

What is the Hex fuses configuration, checksum and config word for programing the pic?

Angelo

[Salami1_1]

ooh you are clairvoyant?? wooh you must be rich then..
I did never edit any hex..
We did an exchange to get it and made the Total tool..
And a friend of ours tested them before us..
the first we have is original and the second with extra crack to work also with orignal smartericsson soft.

but I have tip for you.. go and use TT 1.9 then I can laugh

WBR

[hergsm]

HI

Tested with T65,a3618,R600 readed code,and Flash all OK
dont use TT 190 ....USE only TT 155..

This Free TT more power and simple then free DIV62.
**better offcourse have SEFIGTHER

BR

[Angelo]

Total tool 1.60 and 1.90 doesn´t work with T68i ,( i ´ve not tested other models) phone don´t boot, only 1.55 works.

[Salami1_1]

Originally posted by Angelo
Total tool 1.60 and 1.90 doesn´t work with T68i ,( i ´ve not tested other models) phone don´t boot, only 1.55 works.

you should NOT use 1.9!!!!!
Only mr DaveCroat should do that..

Probably your total tool is now fucked.. so you will have to write hex again. Read my other topic at
http://nokiafree.org/forums/t31094/s.html

for more info.

WBR

Salami1_1

[Angelo]

No, pic is good, it keeps working with 1.55 after used 1.90.

[Salami1_1]

I hope for you it keeps on working then...

it's to bad I have to little info to tell when and how it exactly goes.. but I can tell you all for sure it's not much good.

[Salami1_1]

Some more info:
Lead said on an other forum:
That the destruction code only sometimes activates... it depends on system time!!

And even READ codes could destroy the phones.

WBR

[phantom2002]

hi guys, can anyone tell me if the div cable is the same as the total tool cable (pinout wise) or if any mods are needed to convert it to work with total tool ?

Thanks

[onur2002]

T65 (4 locks) (read codes)
TESTED with

TotalTool v1.55 &1.60-1.90



=====================================
Trying to turn on phone...
Trying to enter test mode...

"Communication error: (0x00)"

[DCT4]

I have same problem as onur2002

T65 & 68 (read codes)
TESTED with

TotalTool v1.55 &1.60-1.90



=====================================
Trying to turn on phone...
Trying to enter test mode...

"Communication error: (0x00)"

Thx2All.

DCT4.